Pixel tree help
 
Notifications
Clear all

Pixel tree help

4 Posts
2 Users
0 Reactions
8,016 Views
Posts: 12
Topic starter
(@spader25)
Eminent Member
Joined: 9 years ago
[#46694]

Hi all!!
I'm wanted to dive into the pixel Christmas light displays and wanted to build a small mega tree.
I was thinking of using vixen software with the WS2811 pixels but not sure what controller to use. Would a DMX512 controllers work? I have no idea how to use the arduino boards or any other ones.
I used to install and setup night club intelligent lighting so I would think the software is kinda the same and wireing is not an issue for me.
I think I'm going to get one sting of pixels and bench test to get the feel for how to control them before I buy more and start building the tree.
Any help and guidance would be great!


3 Replies
Posts: 191
(@davemck)
Estimable Member
Joined: 10 years ago
Spader25 wrote:Hi all!!
I'm wanted to dive into the pixel Christmas light displays and wanted to build a small mega tree.
I was thinking of using vixen software with the WS2811 pixels but not sure what controller to use. Would a DMX512 controllers work? I have no idea how to use the arduino boards or any other ones.
I used to install and setup night club intelligent lighting so I would think the software is kinda the same and wireing is not an issue for me.
I think I'm going to get one sting of pixels and bench test to get the feel for how to control them before I buy more and start building the tree.
Any help and guidance would be great!

Just to get started and get a feel for it I'd suggest an ESPixelPop or espixelstick. Cost is $20* or less and you can control up to 680 pixels via your WiFi router.

*Of course you still have to buy a router if you don't have one, a USB dongle to program the device, pixels, PS for the pixels, misc. supplies to mount the pixels... (No one said this was a cheap hobby!)

Sent from my XT1650 using Tapatalk


Reply
Posts: 12
Topic starter
(@spader25)
Eminent Member
Joined: 9 years ago
DaveMcK wrote:Just to get started and get a feel for it I'd suggest an ESPixelPop or espixelstick. Cost is $20* or less and you can control up to 680 pixels via your WiFi router.

*Of course you still have to buy a router if you don't have one, a USB dongle to program the device, pixels, PS for the pixels, misc. supplies to mount the pixels... (No one said this was a cheap hobby!)

Sent from my XT1650 using Tapatalk

Thanks for the input! I was looking into the bigger controllers and wow this is a very expensive hobby lol!
I think maybe this year to start out I will make some arches. They look a lot easier to do then a pixel tree.
I was looking into the E6804 to start with arches.

I found some WS2811 pixel's on amazon for around $15. Says it's ip68 waterproof. Any input on those type from amazon?


Reply
Posts: 191
(@davemck)
Estimable Member
Joined: 10 years ago
Spader25 wrote:Thanks for the input! I was looking into the bigger controllers and wow this is a very expensive hobby lol!
I think maybe this year to start out I will make some arches. They look a lot easier to do then a pixel tree.
I was looking into the E6804 to start with arches.

I found some WS2811 pixel's on amazon for around $15. Says it's ip68 waterproof. Any input on those type from amazon?

I'm still new and learning here myself, but the 12v ws2811 bullet nodes seem to be popular. 12v gives you less problem with voltage drop than 5v and the nodes are easier to splice and replace bad pixels than the strips.


Reply
Share: