Cajundude wrote:I'll red into this, thanks!Also, in response to all, not looking for any audio transmitting this year for sure, but maybe in the future.
For Audio, PI is the way to go. High quality from DAC PI Hat. Good quality from USB Audio adapter, low quality from PI built in audio.
Cajundude wrote:Awesome and thanks! I was looking at the Pi, but wasn't sure if it would be needed in the long term. If I can always use somewhere, I'm totally fine with getting one for my purpose now..
I use an rPi 3B+ dedicated to running my whole show. It can definitely be utilized so that won't be a waste. rPi's can be used as a Master Falcon Player, Remote Falcon Player to areas you can't get a data wire to, used w/ a Hat for remote prop controller such as a tune to sign using P10 or P5 panels. Like MartinMueller2003 said, it's best for audio when you get to broadcasting.
Cajundude wrote:Awesome and thanks! Looks like the MW power supplies are mostly out of stock, at least for normal pricing, but don't mind spending a few bucks extra to get one to play with.
Meanwell are great power supplies. Extremely reliable. But, you get what you pay for. Also, not necessary. I use MeanWell myself, but there have been several discussions on the forums that the "cheap chinese" supplies work just as well for most people. Then there's the debate about 12v vs 5v. I personally use 12v. That is a discussion that will start a war on most forums. Only you can decide.
Amazon
Wired Watts
Cajundude wrote:All of my reading so far has led me to believe that Falcon is the way to go but that conversation can certainly wait until I do my own due diligence on the end goal.
Falcon are certainly great controllers. In another post, I described the SanDevices like a Jeep Wrangler, cheaper, gets the job done, reliable but more manual. If it breaks parts are available to fix it yourself. The Falcon controllers are more like Ferrari's. More expensive, lot's of bells and whistles, more power, but if you make a mistake an break it, most people don't have the ability to fix surface mount soldered parts. Not too much of a problem if your setup is properly designed for protection. But, mistakes happen. There are several other controllers out there (Kulp, Alphapix...), some good, some bad. I don't have experience with them so I can't comment.
The beautiful thing about this hobby and going this route is, you can expand it steps. This year get a star working and expand to a full show a few years down the road. Be aware, besides the hardware setup and building, the software and making sequences will take a lot of your time. Some full sequences timed to music will take you upwards of 40 - 60 hours.
Cmndr Brain wrote:I use an rPi 3B+ dedicated to running my whole show. It can definitely be utilized so that won't be a waste. rPi's can be used as a Master Falcon Player, Remote Falcon Player to areas you can't get a data wire to, used w/ a Hat for remote prop controller such as a tune to sign using P10 or P5 panels. Like MartinMueller2003 said, it's best for audio when you get to broadcasting.Meanwell are great power supplies. Extremely reliable. But, you get what you pay for. Also, not necessary. I use MeanWell myself, but there have been several discussions on the forums that the "cheap chinese" supplies work just as well for most people. Then there's the debate about 12v vs 5v. I personally use 12v. That is a discussion that will start a war on most forums. Only you can decide.
Amazon
Wired WattsFalcon are certainly great controllers. In another post, I described the SanDevices like a Jeep Wrangler, cheaper, gets the job done, reliable but more manual. If it breaks parts are available to fix it yourself. The Falcon controllers are more like Ferrari's. More expensive, lot's of bells and whistles, more power, but if you make a mistake an break it, most people don't have the ability to fix surface mount soldered parts. Not too much of a problem if your setup is properly designed for protection. But, mistakes happen. There are several other controllers out there (Kulp, Alphapix...), some good, some bad. I don't have experience with them so I can't comment.
The beautiful thing about this hobby and going this route is, you can expand it steps. This year get a star working and expand to a full show a few years down the road. Be aware, besides the hardware setup and building, the software and making sequences will take a lot of your time. Some full sequences timed to music will take you upwards of 40 - 60 hours.
Sounds like a vacation to me, can't wait! :yeah: Thanks again to all! I guess at this point I will look for anything that works that is in stock. LOL
Bump up for update question added to top. Thanks!
