Mega Tree strings
 
Notifications
Clear all

Mega Tree strings

16 Posts
10 Users
0 Reactions
10.8 K Views
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
How about using Dirknerkles way except put a cable strain relief in the loop?

See "rjchu" picture #2 for what I'm suggesting.


Reply
kostyun
Posts: 2178
Guest
(@kostyun)
Member
Joined: 20 years ago

Mine tree lines get secured with a loop at the top with a snap clip, and are 600 light strings (48 bundles 50 ft long) - I used a wire rope/pulley/winch system to lift the lights from the ground to the top to light the tree. Benefit is that I can take the lights down for storms. Strands are zip tied evey 8" with winch I do have to leave a little slack otherwise I can tear the sets apart (which I have done)

The led mega tree (some year) will be redone with rgbw c7 LEDs and a 1/16 steel cable core.


Reply
Wayne J
Posts: 7789
Topic starter
(@wayne-j)
Illustrious Member
Joined: 20 years ago

OK, thanks for all of the input guys. Here is how I have decided to do it.....

I made the topper(s) with holes in them. I will be using 1/16" wire rope as the tension line to zip tie the light strings to. I will attach the wire rope with S-hooks to the top plates. Small turnbuckles on the bottom will keep the tension on the lines.

megatree topper
megatreetopper2

Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Great craftsmanship, Wayne. The welds are beautiful -- but not surprizing for a person who works in the car racing world!

Looks like a fabulous topper and a great concept!


Reply
Posts: 268
(@jakeleg1969)
Reputable Member
Joined: 17 years ago
dirknerkle wrote:Great craftsmanship, Wayne. The welds are beautiful -- but not surprizing for a person who works in the car racing world!

Looks like a fabulous topper and a great concept!

Quite simply stated... "What he said".. Nice job...

Jerry in Louisiana:cool:


Reply
Page 3 / 4
Share: