Mega Tree strings
 
Notifications
Clear all

Mega Tree strings

16 Posts
10 Users
0 Reactions
10.8 K Views
DennyMo
Posts: 236
(@dennymo)
Reputable Member
Joined: 19 years ago
rjchu wrote:I put bare bulbs strung on wire up on the patio in the back and threaded 1/16" steel rope through them

I see you're using uncoated wire rope. Any issues with chafing? I'd like to do the same thing this year, but thought coated wire rope would be necessary.


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

I use uncoated galvanized steel 1/16 inch. Zip ties about every 18 inches and haven't noticed any chafing. I changed my faded blue this year and had a good look at it.


Reply
ChiefWarrant
Posts: 570
(@chiefwarrant)
Honorable Member
Joined: 19 years ago
Wayne J wrote:How is eveveyone hooking their mega strings to your hooks on your Mega Tree? With my tree being over 20' this year, I cannot do it the way I have in the past (just looping them over in a V configuration). I now have to attach the ends to a hook. So I am needing a new way to do it.
Show me how you do yours. Pictures would be great. 😉

Wayne, thanks for the help in the past....now a chance to return the favor (I hope).

Using a messenger line is the way to go. But instead of 1/16" wire rope, I suggest paracord/550 cord ( http://www.cheaperthandirt.com/MHR320-1.html ). It is much cheaper to purchase at about $0.04/foot, where as wire rope is 10x more costly at about $0.40/foot.

For guys in the military, 550 cord is more ubiquitous than duck-tape (or as we call it-100mph tape). I have used this stuff to tie something up and have it last forever (even outside in the elements).

Once the messenger line is attached, secure your light string to it. The messenger line will take all the strain off the light string. If you want to see an example of a messenger line in use, there should be one running from the big gray transformer (from power company) to the fascia of your house, w/ cables wrapped around it. All the strain is on the messenger line.

in the military, when we run over head cable on poles (not planted in the ground), we typically use four (4) guy ropes and this works just fine in about 90% of the situations I have encountered. With a Mega-tree, you will probably have at least eight light strings, so just use the messenger line as additional guy ropes. But at $0.04/ft, it is not that expensive to run dedicated guy ropes.

Depending on the thickness of the pole you choose, you may need to worry about bowing in the center. This is corrected by using a set of guy ropes about mid way down (see image, please ignore the comments on image. This image is to demonstrate using multiple guy ropes.). Using this type of configuration, I have made sturdy poles out of stuff similar to schedule 40 PVC.

I hope this helps

Tony


Reply
DennyMo
Posts: 236
(@dennymo)
Reputable Member
Joined: 19 years ago

Tony, sounds like a great idea. What kind of lock or tensioner would you use for that kind of cord?


Reply
ChiefWarrant
Posts: 570
(@chiefwarrant)
Honorable Member
Joined: 19 years ago
DennyMo wrote:Tony, sounds like a great idea. What kind of lock or tensioner would you use for that kind of cord?

Since the cord is non elastic, you can use the same type of locking device used on tent lines. Also, above I stated schedule 80, but I meant to say schedule 40.


Reply
Page 2 / 4
Share: