Mega Tree strings
 
Notifications
Clear all

Mega Tree strings

16 Posts
10 Users
0 Reactions
10.8 K Views
Wayne J
Posts: 7789
Topic starter
(@wayne-j)
Illustrious Member
Joined: 20 years ago
[#11868]

How is eveveyone hooking their mega strings to your hooks on your Mega Tree? With my tree being over 20' this year, I cannot do it the way I have in the past (just looping them over in a V configuration). I now have to attach the ends to a hook. So I am needing a new way to do it.
Show me how you do yours. Pictures would be great. 😉


15 Replies
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Sorry, no picture, but I just loop back the end plug a couple inches and fasten it with a zip tie. The wire loop then takes the strain off the plug and is easy to loop over a hook.


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Hi Wayne, I use Super Strings, 1/16th inch cable with a thimble on each end. I wrap the lights around the thimble and zip tie. Each color separately so I can change one if needed (faded blue) without taking them all off. Sorry no pic's still packed away.


Reply
rjchu
Posts: 1191
(@rjchu)
Noble Member
Joined: 17 years ago

EDIT: Attached are some pics of my patio lights and how I hung/strung them up to keep tension off the power line.

---

I'm not at home to take/post pictures but I put bare bulbs strung on wire up on the patio in the back and threaded 1/16" steel rope through them and used clamps and thimbles at the ends for the rope and attached to quick connect hooks so there wasn't much/any tension on the actual wire that powers the lights. It's pretty straightforward and very cheap. You wouldn't have the thread holes with mini strings but zipties periodically should do nicely. I'll take some pics as I'm sure I'm not doing a good job of explaining it here...

The basic parts are below though (size to your needs though):

http://www.homedepot.com/h_d1/N-5yc1vZ1xh8/R-100240429/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

http://www.homedepot.com/h_d1/N-5yc1vZ1xh8/R-100338514/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

http://www.homedepot.com/h_d1/N-5yc1vZ1xh8/R-100259904/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

Thanks,

-joni-

Wayne J wrote:How is eveveyone hooking their mega strings to your hooks on your Mega Tree? With my tree being over 20' this year, I cannot do it the way I have in the past (just looping them over in a V configuration). I now have to attach the ends to a hook. So I am needing a new way to do it.
Show me how you do yours. Pictures would be great. 😉
IMG 1778
IMG 1780
IMG 1781
IMG 1782

Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

I should have some photos soon of what I am intending to do.
Basically I will be using long loop of 3/16 poly string ( about 100cm folded in two) fixed to the LED string in several places. I haven't decided if I will use cable ties yet.

The aim is not to have all the stress holding the string up at a single point.

Here is how I do this: tie off the top point and hoist the string up. leave it for a day. I then drop the string and tie the poly string to the LED String again about 150mm lower.
I repeat this process until I have tied off the whole 500mm of Poly String.


Reply
Page 1 / 4
Share: