Mega tree pixel str...
 
Notifications
Clear all

Mega tree pixel string support query

10 Posts
9 Users
0 Reactions
4,925 Views
Aurbo99
Posts: 2804
Moderator
Topic starter
(@aurbo99)
Member
Joined: 19 years ago
[#25355]

In the past my Mega tree was all incandescent strings supported on a para-cord to take the tension off the wires.

With a Pixel string, I tried that method last season but did not get the effect(neatness) I wanted.

What other methods have folks successfully used to mount pixel strings for a Mega tree?


9 Replies
Posts: 1792
(@barbotte)
Noble Member
Joined: 17 years ago

righ now i am making my tree with 1/2 inch emt ... i am attaching my pixel to them with zip tie at 4 inch apart ... it is a long process and i have the room to store them after.... some people are using metal strapping and some are using webbing .... either way your doing it will be a long process to attache them to it ... cheer


Reply
Posts: 353
(@bigredsoftware)
Reputable Member
Joined: 15 years ago

When I built my tree last year neatness was very important to me. I used half inch polycarbonate, but anything rigid is the way to go. Storage can be a hassle, but rigid strips can be a great time saver.


Reply
Posts: 853
(@roterhead)
Prominent Member
Joined: 15 years ago
bigredsoftware wrote:When I built my tree last year neatness was very important to me. I used half inch polycarbonate, but anything rigid is the way to go. Storage can be a hassle, but rigid strips can be a great time saver.

Polycarbonate? How long were the strips? 24' long strips would be hard to find! 8<}

Perhaps you bolted multiple strips together?


Reply
LightUpMA
Posts: 208
(@lightupma)
Estimable Member
Joined: 15 years ago

Last year I took 16 gray PVC conduits and after several unsuccessful tries, I taped the pixels using packing or shipping tape. It was clear and very strong. The problem I had was with wind and cold the poles didn't stay straight. Also some poles has metal Emt poles for strength.

That being said, it wasn't as perfectly straight as I'd like it BUT it was the absolute best in the area. No one has seen pixels like this in someone's front yard. And as critical as I want to be about it - everyone loved the show.


Reply
Posts: 413
(@gizmohd)
Honorable Member
Joined: 17 years ago
LightUpMA wrote:

That being said, it wasn't as perfectly straight as I'd like it BUT it was the absolute best in the area. No one has seen pixels like this in someone's front yard. And as critical as I want to be about it - everyone loved the show.

We always are our worst critics aren't we? 😉


Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

For some of the nutcracker effects to look their best, you need very even vertical spacing.

I used 1809 flex strips, 30 LEDs/ meter. Total on 4m strip gave 120 nodes or 360 channels.

Vertical spacing is exactly 1.3"

I cable tied flex strip to 1/2" metal emt. I used metal so there would be no bending.

It came out nice.


Reply
Posts: 1076
 Zeph
(@zeph)
Noble Member
Joined: 15 years ago

EMT is thin wall electrical conduit, right? And PVC conduit is likewise easily found at, say, Lowes or Home Depot.

What is 1/2" polycarbonate and where it is found?


Reply
Posts: 353
(@bigredsoftware)
Reputable Member
Joined: 15 years ago

I'm on my phone right now so I can't successfully make links because I don't know how, but in the mega tree section the title of my thread was "The not so mega tree". Half inch polycarbonate sheet can be found at your local plastic suppliers, several hundred dollars for a sheet. The strips were only eight feet long. I really can't recommend it because it is so expensive, only reason I went with it is because I work at a plastic suppliers and we had scratched material I could take. Now don't get me wrong , perhaps you could approach a supplier and mention that you want strips and that scratches do not matter. Normally this stuff is sold perfectly clear, so if there are scratches its essentially garbage. My real advice is to just make sure you have a way to make spacing even with as little flex as possible. Even with solid strips you will still need some kind of tension system.


Reply
Posts: 98
(@walter-monkhouse)
Estimable Member
Joined: 15 years ago

To get pixels straight and aligned for a mega tree, consider attaching pixel strings to tensioned banding material . A tutorial for this procedure is available at http://www.magicchristmasnews.org/building_a_colormotions_tree_sm.pdf . Also an update on this construction is forthcoming. Walter


Reply
Share: