Light String Suppor...
 
Notifications
Clear all

Light String Support

11 Posts
6 Users
0 Reactions
6,652 Views
MichiganLights
Posts: 479
Topic starter
(@michiganlights)
Prominent Member
Joined: 14 years ago
[#24974]

I'm contemplating a 10-15' tree. I'm thinking PVC construction vertical strands ~39 channels.

What i haven't been able to figure out reading tons of posts is how the light strings are supported. Do they hang under their own weight or are they supported with parallel strings?


10 Replies
Posts: 2039
(@dougp)
Noble Member
Joined: 17 years ago

I just let them hang under their own weight. I have a 15 foot tree.


Reply
Posts: 838
(@strother85)
Prominent Member
Joined: 15 years ago

I used nylon paracord to support the weight. I made superstrands with 3 different light string colors and the paracord zip tied together. The paracord supports all the weight of the lights. If you are just doing one color strand in your mega tree I would say the strings can handle their own weight. When you get into 2-3+ colors, those superstrands get pretty heavy.


Reply
MichiganLights
Posts: 479
Topic starter
(@michiganlights)
Prominent Member
Joined: 14 years ago

I was planing on 3 colors R,G, & W.

So you twist one of each color into a multi-string? Doesn't that reduce the "fill" effect?

This will be my first tree so I'm still learning, figuring things out.


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

If you use 100 ct. LED's, they are 33' long, you can double them and have twice the lights. If you have a solid enough base ring, you can pull the super strings pretty tight and not have to use any type of support.


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

I use those super cheap 100 led strings that are 32 feet long and reinforce with poly twin "just in case" - cheap insurance. They get doubled over for a 16' lighted part (and they are 3-4' off the ground) for around a 19' tall tree. I have 32 channels but it looks like I have 64 strings because they are doubled and that fills in nicely.

Mega Captkirk med

You kinda get the coverage idea if you can ignore the spin I was doing taking the pic...


Reply
Posts: 838
(@strother85)
Prominent Member
Joined: 15 years ago
MichiganLights wrote:I was planing on 3 colors R,G, & W.

So you twist one of each color into a multi-string? Doesn't that reduce the "fill" effect?

This will be my first tree so I'm still learning, figuring things out.

I took an incan set of red, green, and blue (each approx. 24' long) and laid them out straight. I cut a piece of the nylon paracord the same length and laid it down straight with the already laid out light strands. I took a 4" zip strip(the small cheap clear ones) and zip tied the bundle of light strands and paracord together at approx. 4' intervals. When I did this I had my wife hold the opposite end and I pulled the paracord tight as it does have a little flex to it and I wanted to prevent any sagging once the superstrands were hanging. I then doubled the newly made superstrand over so that it was two sides of 12'. I attached a small snap hook to the paracord at the top of the doubled over section. I put a zip tie on the bundle to each side of snap hook to prevent the snap hook from sliding to either side. I then hung the snap hook from the hook on the top of the mega tree and then the two sides essentially "v'd" down to the bottom support of the mega tree. This v had approx. 7.5" between the two sides of the strand at the bottom connection. I stayed with this spacing around the mega tree. I ended up with 24 of these superstrands, doubled over making it appear that I had 48. Each of the 48 is at 7.5" spacing(approximately). I connected two superstrands for each channel(appears I have 4 strands per channel). This ended up giving me 12 channels of r/g/b. You can see the videos of my mega tree in action here

. I unfortunately did not take pictures of the superstrands that I made but I did do a write up of how I made my mega tree in this thread http://doityourselfchristmas.com/forums/showthread.php?18104-14-mega-medium-tree .

Since you are in SE michigan, as I am too. I can refer you to either Harry's Army Surplus on Telegraph in Dearborn or Harbor Freight on Eureka in Southgate for your paracord. They both offer 20% online coupons quite often. I think it ended up being around $4 for 100' of the cord. You can also order it online in 1000' spools from several places.

Also, since I am in the area let me know if you need any help. I am in Taylor, I am not sure where you are but feel free to PM me if you are not comfortable sharing your location for all to see.

-Eric


Reply
MichiganLights
Posts: 479
Topic starter
(@michiganlights)
Prominent Member
Joined: 14 years ago
Strother85 wrote:This v had approx. 7.5" between the two sides of the strand at the bottom connection. I stayed with this spacing around the mega tree. I ended up with 24 of these superstrands, doubled over making it appear that I had 48. Each of the 48 is at 7.5" spacing(approximately). I connected two superstrands for each channel(appears I have 4 strands per channel). This ended up giving me 12 channels of r/g/b.

Eric,

You have 72 total strands, 6 cases of lights? :wacko: wow!

Is your base 3 sections of 10" PVC pipe? I reverse engineered the 7.5" x 48 strings.


Reply
Posts: 838
(@strother85)
Prominent Member
Joined: 15 years ago

You are correct, 3 pieces of 10' 3/4" electrical(gray) PVC conduit


Reply
MichiganLights
Posts: 479
Topic starter
(@michiganlights)
Prominent Member
Joined: 14 years ago

For "super strings" I have to think #275 or #100 para-cord is adequate, right?

Is there any size preference?


Reply
Page 1 / 2
Share: