Mega tree on a slan...
 
Notifications
Clear all

Mega tree on a slant

8 Posts
6 Users
0 Reactions
3,779 Views
Posts: 25
Topic starter
(@bjlled)
Eminent Member
Joined: 15 years ago
[#18932]

Does anyone having any tips for a mega tree on a slant? It's not a steep grade, but it will present issues. Should I raise up the front and make the base ring level? I also think i am going to have to put the center pole in the ground, as I dont see any other option. Any thoughts, opinions would be helpful.


7 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

My front yard slopes also, and I have had good luck with having the back of the ring at ground level and raising the front until it is level with the back. I use 8 pieces of variious lengths of rebar pounded in the ground at a 45 deg. angle, and then zip tie the ring to them while I am attaching the lights. (I first put them in straight up, but they pulled loose pretty easily) Once the lights are attached, they will keep the ring nicely in place, but it gives a starting point. I leave it all that way until teardown.


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

The one I did at my house was on a grade also. Just used different length posts to hold the base ring level and zip tied them together.


Reply
Posts: 25
Topic starter
(@bjlled)
Eminent Member
Joined: 15 years ago

How about the center pole? In the ground?


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

My tree was made from PVC, so I put a cap on the bottom and then drilled a hole in the center. I then drove a rod in the ground (left about 3" up) and placed the pole over it.
Put a piece of plywood down though, the pole will sink into the ground.


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

My yard slopes. I used a portable hole a packer on one end. The hole is tied down using turn buckles and chain to reo rod belted into the ground.


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
Bjlled wrote:Does anyone having any tips for a mega tree on a slant? It's not a steep grade, but it will present issues. Should I raise up the front and make the base ring level? I also think i am going to have to put the center pole in the ground, as I dont see any other option. Any thoughts, opinions would be helpful.

There's Always Options in this hobby. I've seen people run the strings to the ground on a steep slope and it still looks good (I would have guessed it would look bad till I saw it). Most make it level as the other posts show, mine also. Pole in the ground works for most (I have a flag pole I use) but port-a-hole by Mr. Monk is used a lot. And if it's not too tall some incorporate the pole into the PVC frame that holds the ring to make it free standing or guy lines to help out. So the options are many.

Brian


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago
Bjlled wrote:Does anyone having any tips for a mega tree on a slant? It's not a steep grade, but it will present issues. Should I raise up the front and make the base ring level? I also think i am going to have to put the center pole in the ground, as I dont see any other option. Any thoughts, opinions would be helpful.

While not a steep grade, my Megatree sits on a bit of a slope. There's about a 6" drop from front of my base ring to the back. These pictures have capstions which should help describe what I do.

http://www.kentucky-christmas.com/photos/megatree-photos


Reply
Share: