Mega Tree JUMP
 
Notifications
Clear all

Mega Tree JUMP

1 Posts
1 Users
0 Reactions
2,231 Views
Posts: 242
Topic starter
(@rsegreto)
Reputable Member
Joined: 6 years ago
[#55434]

For this year I had a 16 x 50 180 degree tree using the boscoyo topper and 3/4" EMT. This worked but I had some alignment issues and the pole started to bend a little when I put tension on the strips with the bungee balls.

For next year I want to add 8 strips for a total of 24 x 50 and use a steel topper with the floor flanges. I was thinking about using the portable hole and really like the idea of the ASAP JR design and being able to raise up the height of the pole to get optimal tension on the strips. Else the height of the base pole needs to be precise or the overall strip lengths might need to be tweaked if your initial measurements are off. I like having some ability to adjust rather than rely on my measurements to be precise ha.

I stumbled upon the original Monkhouse JUMP design and think this might work for me. The ASAP design seems overkill for my 8-1/2' tree where the JUMP seems to be for smaller applications like mine. It uses a bottle jack to raise it which would work for me as well.

I wanted to see if anyone has used this with the portable hole?

Thanks,
-Russ


Share: