I have a couple questions...
I am trying to build a 16' tree, 2.5' star, 12v, 270 degree tree, 32 strands, 1 in spacing @ 40% power.
Question 1... what type of tree topper would I need? or size? I am unsure
Question 2... power... it is saying that I need 7 power supplies? is that true? If I am connecting the lights directly to my falcon f16 with expansion board. Would I still need 7 power supplies? Would I need to do power injection?
Question 3... is there a process how to install the strands - start at the bottom, go up 100 pixels connect my next strand of lights... I am unsure how to properly connect the strands of lights.
Thanks so much for your help.
Palussa wrote:I have a couple questions...I am trying to build a 16' tree, 2.5' star, 12v, 270 degree tree, 32 strands, 1 in spacing @ 40% power.
Question 1... what type of tree topper would I need? or size? I am unsure
Question 2... power... it is saying that I need 7 power supplies? is that true? If I am connecting the lights directly to my falcon f16 with expansion board. Would I still need 7 power supplies? Would I need to do power injection?
Question 3... is there a process how to install the strands - start at the bottom, go up 100 pixels connect my next strand of lights... I am unsure how to properly connect the strands of lights.Thanks so much for your help.
1. There are many options for toppers from various vendors. Some are made to accept pixel mounting strips slid through the topper and zip tied to secure them, others use J bolts so you can hang the same pixel mounting strips on them. It's a matter of preference, really. Seems as though the J bolt method would be more durable.
2. The calculator is basing the need for 7 power supplies on the amount of power your number of pixels would consume running at 100% brightness and full white (which consumes the most power of any color) and at a certain percentage of each 350W/29A power supply's full capacity (maybe 80-90% capacity? I can't recall). Most folks run their trees at 20% from what I've seen, which would increase the amount of pixels able to be used on each power supply by a good bit. I'm running 1600 pixels on one power supply at 20% with no issue at all. I'm not a pro at figuring out power requirements, and I always err on the side of having more than I need available. I don't think you would need 7 power supplies by any means when running at 40% or lower, but I would think you need 4 or 5 if I'm making a wild guess.
3. If you're going for a nice round number of, say, 200 lights...then you would just need 2 strands of lights per tree strand. You push the pixels through a pixel mounting strip and that's what holds the line of pixels in place. The strands of pixels would just connect together with whatever connector you choose to get on your pixels (most are xConnect nowadays). Your power and data would typically come from the bottom. There are many ways you can accomplish all of this, though, and it just depends on your location and your preference really.
Look into getting an HP server power supply. I use a 12v 100amp. When run off of 110v it puts out something like 80 amps. Or if you’re worried about it switch to 5v. Less voltage means more pixels per amp. And power injection on a tree is easier with everything so close.
Okay I feel stupid to ask this. Last question.
If I have 32 strands for my 270 degree mega tree at 1”. In order to go 16’ high would I need to buy 64 100 nodes strands to make a total height of 16’.
Sent from my iPhone using Tapatalk
6,144 nodes
If you're going up 100 and down 100 using 12 volts at 40% power you should not need injection. You may even consider lowering that 40% to 25%. In any case if you find the need to inject, then inject at the end of 200 pixels, at the bottom and not halfway up the string which your picture seems to show. Remember, if you inject at 40% or 25% you will need fewer power supplies. HP server supplies are awesome. I ran a 900 pixel tree, 90 pixel star and various other pixel props totally 1,800 pixels off one 12 volt, 750 watt 62.5 amp server supply without any injection. I ran my pixels at 25%. You can get 1200 watt supplies. The nice thing about server supplies is you can get breakout boards for them at parallelminer.com. I used their $6 breakout board and used their wires with connectors. You can use 16 gauge and even 14 gauge but the 16 is nice because each one has 3 circuits with a connector on each end. If you cut it in half then you have 2 connectors with 6 outputs. Great for injecting. Well worth the investment.
https://www.parallelminer.com/product/x5-breakout-board-adapter-compatible-with-hp-1200-watt-dps-1200fb/
https://www.parallelminer.com/product/12-inch-16awg-6-pin-male-to-8-pin-62-male-pcie-power-cable-copy/
https://www.parallelminer.com/product/24-inch-16awg-6-pin-male-to-8-pin-62-male-pcie-power-cable/
Pic of one of my controllers in BUD box with server supply and breakout board and 2 distro boards with 8 outputs for injecting..
Sent from my SM-T710 using Tapatalk

Palussa wrote:Okay I feel stupid to ask this. Last question.If I have 32 strands for my 270 degree mega tree at 1”. In order to go 16’ high would I need to buy 64 100 nodes strands to make a total height of 16’.
Sent from my iPhone using Tapatalk
Yes. 16' x12"= 192 pixels per strand. 192x32=6144.
That is a very dense tree.
You may get by without power injection at top but not sure. I have 74 up and 74 down every 2 inch (148)12v and power both ends. Usually at 30% or lower. 192 pixels without power injection may not fly.
Sent from my SM-A505U using Tapatalk
Palussa wrote:I have a couple questions...I am trying to build a 16' tree, 2.5' star, 12v, 270 degree tree, 32 strands, 1 in spacing @ 40% power.
Question 1... what type of tree topper would I need? or size? I am unsure
Question 2... power... it is saying that I need 7 power supplies? is that true? If I am connecting the lights directly to my falcon f16 with expansion board. Would I still need 7 power supplies? Would I need to do power injection?
Question 3... is there a process how to install the strands - start at the bottom, go up 100 pixels connect my next strand of lights... I am unsure how to properly connect the strands of lights.Thanks so much for your help.
When all else fails start at the beginning of a thread (talking to myself).
Most of your power questions have been answered. I would say that you would have to inject somewhere with this setup. If this is what you truly want then go for it. Injecting at the top or somewhere up the string is something most people try to avoid. Not saying it can't be done, maybe someone who does will chime in. I think most people try to avoid it and plan around it. If you were to do every 2" that would be 96 per and would be easy to power from bottom. Or, every 1" at 12' tall would be 144, again powered all at the bottom. It is ultimately Your Tree. Do it how you want. I just try to make things easy for myself and have no desire to do power injection anywhere but on bottom of tree.
I, like most, cut and splice pixels to our desired length. I solder mine, some use solder sleeves or other means to join the wire back together. I quit using the standard, plug and twist connectors that come on pixel strings and I use a 2 pin or 3 pin automotive type connector on all my pixels.
My tree is about 12' 24x74 @ 2" 180 degree. The 36" Boyosco star is added to that.
Sent from my SM-A505U using Tapatalk
What did you make your base out of? Thanks so much for your words and advice.
Sent from my iPhone using Tapatalk
I do Electrical work so it is a 1" aluminum ridged conduit that a bent at work. Then I have several pieces that are 1.5" ridged with a 3/4 welded to them to make the T. Drive rebar in the ground, sleeve the 3/4 over the rebar and drill a whole through the 3/4and the rebar to put a pin or small screw to hold them together. Then run the 1" through the top 1.5" piece. I painted it black but you can see the threads on each end of the conduit in this picture. It's a slight adjustment from Walter Monkhouse's design. I use the portable whole and the ASAP also. His stuff can be found on this and other forums out there. Its DIY and use what you got. 
Sent from my SM-A505U using Tapatalk


