I use a 20 ft Sundowner. I don't know how much it weighs but more than ten pounds for sure and less than thirty. I've had a 4X6 flag in 60 MPH winds without any trouble. I use super strings (1/16th inch cable with the lights zip tied to it). 16 three color strings for 48 channels. The pole uses pin locks that you push in to lower each section. These pin locks don't hold up to the weight of the lights. I use a rubber pipe coupler with two hose clamps ( Thank you Tim Fischer ). I know others have used twice the lights I use (96 strings). But don't plan on lifting that many by yourself. I use PVC electrical conduit ring at the bottom. The top I unscrew the ball and bolt on a plate with hooks fashioned after Wayne J's Mega tree topper. I don't have any pictures, but I'll be glad to answer questions.
ChiefWarrant wrote:Those also come in a 9 Meter variety....I was thinking the same thing, but you cant even find them at DRMO.
How about an old 30 meter mast! Wouldn't that be a sight.
FreqMan wrote:How about an old 30 meter mast! Wouldn't that be a sight.
You haven't seen Frank's megatree yet, huh? Go to: http://www.ahwatukeeholidays.com/
Thanks everyone for the great replies and comments. I've been thinking about this some more and was originally planning on drilling holes in the bottom of each pole segment and putting a bolt through them to prevent them from "untelescoping" as budude mentioned. I then thought that tube ring clamps would be even better since I wouldn't have to drill - though I don't mind it since I bought this for a megatree only to get the height. I like the idea someone else mentioned of using tube ring clamps but putting rubber hosing under them to protect the pole. I'd also planned on guy wires either attached to the bottom flag clip or a little further down the mast. I'd also thought that for year one I'd only telescope 4 of the 5 sections for a total hieght of 16 feet vs the max of 20.
I should also mention that I used a 20% off coupon to get the price down to $35 which I figured was worth the gamble. If anyone's interested in getting one of these too I can dig up the email with the coupon code in it.
Thanks again everyone for your feedback, I'm looking forward to when this thing arrives so I can give it a shot.
-joni-
Hi, Tim has a video on his web site of his mega-tree construction which includes the installing of rubber coupling's.
http://www.plymouthlights.com/megatree.htm
The top to hold the lights is like Wayne J's but with just a hole in the middle to put the bolt thru. here's a link from his site.
http://www.jamesfamilychristmas.com/index.php?option=com_content&task=view&id=23&Itemid=36
This is what I based mine on and I think these two links give the details needed.
Brian

