Expanding MegaTree
 
Notifications
Clear all

Expanding MegaTree

2 Posts
2 Users
0 Reactions
1,801 Views
toy4x4
Posts: 25
Topic starter
(@toy4x4)
Eminent Member
Joined: 13 years ago
[#46461]

I am going from a 16 strand MegaTree to possibly a 32 strand.

I have the following hardware to work with:

32 x WS2811
6 pixels x WS2811 for a star
Pix Lite 16 or HolidayCoro Alpha pix 16 or SanDevices E682
Lots of HolidayCoro 3 wire waterproof pigtails.
Use XLights and LOR

I had this working with 16 strands last year on a 10' tree with a 6' 4" round bottom ring. I assume the controller doesn't make that much difference. I am leaning toward the Pixel Lite 16 to control this. The AlphaPix is already setup for 16 strands and I want to leave it alone so I can quickly setup the tree with 16 strands if I run out of time. I am rebuilding the tree structure right now and prepping for how to re-wire this thing. I would prefer to drive the 32 strands and 6 extra pixels off the same controller.

I guess the main questions here are centered around wiring the new strands in. I assume I should wire each strand with power directly but "daisy chain" the data wire to the extra strands? And examples would be appreciated.

Second would be that I am wanting to do a 270 degree tree and not a full 360. Is 32 strands to many to this size Mega Tree or is it worth backing down to 18 more strands to get the 270?

Probably most of the rest of my questions are related to software so I'll wait until after I play with the new setup.


1 Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

I don't think there is such a thing as too many strings. Your a long ways from P10 density. Lots of people using P10 panels. 270 is a great density increase and maintain tree look. Your plan should work great. I don't know anything about your controller though.

Sent from my SM-G930V using Tapatalk


Reply
Share: