Hope I can explain this correctly. I have this idea to do a 180 mega tree. I want the spacing on the 180 degrees to stay the same as the spacing on the diameter.
So on the diameter I want 16 equal spaces of 6 inches each.
I know on the half circle the spacing between points 1 and 2 and points between 15 and 16 will be the largest.
I have searched all morning for a formula for this and cant find anything. Anyone ever tried this?
Try this, put in number of strings double of what you want (360 at 32 = spacing for 16 at 180)
http://www.altoonalights.com/mega/mega_calc.php
Forget this, I missread that you were doing a flat tree and wanted it to look like a 180.
Hi, the distance from the center can be calculated like this:
Middle string is Sine(0) * (length of base /2).
First and last string are Sine(90) * (length of base /2).
For the others just work out how many degrees they are from the center.
stallionent wrote:Close up of bottom, Space between strings is adjustable.
I am going to try and build something where the 16 strings are all facing forward.
easy, take 72 long board and divide by 16. or any length board divide x 16
That would give me even spacing on the circle. I want even spacing on the diameter.
what is the Diameter?



