ColorMotions Tree
 
Notifications
Clear all

ColorMotions Tree

67 Posts
30 Users
0 Reactions
38.6 K Views
Posts: 98
Topic starter
(@walter-monkhouse)
Estimable Member
Joined: 15 years ago
[#17956]

RBG pixel node strings are attached to 5/8" wide polyester banding straps using Scotch Super 88 electrical tape. The banding material carrying the pixel nodes is tensioned between a topper and a bottom ring. On top the bands are terminated to a "D" ring which hooks onto a "J" bolt. At the bottom the bands are attached to an eye bolt which fits into the bottom ring. The result is evenly spaced pixel nodes which stand out 90 degrees from the supporting bands. The pixel node bands are very durable and can be rolled up for storage.

These videos are short samples taken with a pocket camera. Better resolution videos coming later--


66 Replies
Posts: 528
(@bud29)
Honorable Member
Joined: 17 years ago

That looks great Walter! I gotta quit looking at these pixel mega trees, it's gonna end up making me spend a lot of money. How many strings, type are there on your tree?


Reply
Posts: 844
(@ags0000)
Noble Member
Joined: 16 years ago

Would you provide a ballpark estimate of the cost for the strapping (not the pixels) and the dimension of the tree? It looks great. I used several hoops to provide my tree's shape, and had to zip-tie at over 600 points. It was tedious, and when I take it down, I'll have to do it all again next year. It sounds like your setup can be stored and reused without all the effort each year. Nice job.


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

How Many Pixels and what type?

The Tree looks great. Some very cool sequences.


Reply
bcstuff
Posts: 449
(@bcstuff)
Reputable Member
Joined: 16 years ago

Nice Job Walter!

By the way in case some of you don't know... Walter is the designer of the Monkhouse JUMP (Jack up Mega Pole) and Portable Hole. I built both this year for my Mega tree and it is nice and sturdy!
You can see them and instructions on how to build on his website:
http://www.magicchristmas.org/

Thanks Walter!


Reply
Posts: 3
(@migalhas)
New Member
Joined: 15 years ago

Hi Walter,
I just seen your vid, looks awsome.
Any change of you making a HOW TO?
Or giving some more info on the tree!!

Best Regards


Reply
Posts: 448
(@bobkeyes)
Honorable Member
Joined: 17 years ago

Is this something for DIYers or do you intend to sell it. We haven't heard anymore from you on any details??


Reply
Posts: 98
Topic starter
(@walter-monkhouse)
Estimable Member
Joined: 15 years ago

This is for DIY. Not for sale. The videos were just a sample with High Def videos to come so the detail can be seen better. We struggled for a year to find a way to get the pixel nodes to line up straight and not be random hanging. The use of Banding Material proved to be one solution - I'm sure there are others. We will be posting some detailed pics of construction but for now here is an explanation- The bands are 5/8 " wide and 1400# test polyester banding. Negligent stretch or temperature effect. We bought a 1400 ft roll to experiment with and have lots left over. A group buy is advisable . After deciding your tree height the next thing is make a master string that the others can be copied from. You will need 2 sturdy points to attach the cut band to . We used our riding lawnmower . A truck or car can be used to attach one end and the other to something immovable. Pics to come. The pixel string was taped to the bands with Scotch Super 88 electrical tape - wrapping on each side of the pixel to make it stand up 90 degrees from the band. Each pixel spaced at 4" + or - 1/4 ". The top end is attached to a 5/8 " "D" ring with 3 tie wraps. The bottom end attached to a 1/4 " X 4 " eye bolt which has been opened up enough to allow the band thru. 4 tie wraps used here. Pics to come. Method of attachment is critical- do not drill or burn holes in the polyester banding- it will come apart. Tested tensioning to 50 # , but use only about 10 # on tree. There is more to describe which will come as soon as we can put it all together


Reply
Posts: 448
(@bobkeyes)
Honorable Member
Joined: 17 years ago

Thanks a lot. Lots of questions. How tall, how many strings?

Hadn't heard anything from you and didn't know what your intentions were. Glad it's DIY!!!


Reply
Greg in Canby
Posts: 854
(@greg-in-canby)
Prominent Member
Joined: 19 years ago

Looking forward to additional info and pictures.

Greg


Reply
Page 1 / 7
Share: