Cant decide on a to...
 
Notifications
Clear all

Cant decide on a topper

9 Posts
4 Users
0 Reactions
3,523 Views
Posts: 49
Topic starter
(@submarine-guy)
Trusted Member
Joined: 10 years ago
[#42764]

I have been racking my brain on which topper to purchase. I like the one from holiday coro because you slide the strips through and secure with a MISR but the one from BOSCOYO seems to fit the type of pipe I want to use. Should I just consider getting the coro one and making modifications to fit the pole I intend to use? I'm planning to do a tree that is about 15-17 feet tall so I don't really trust FTR to hold if I get any type of wind. Thoughts? Thanks.


8 Replies
Posts: 142
(@mt2525)
Estimable Member
Joined: 14 years ago

Here is what I used. It is well made and heavy duty. I have it on top of my 12 ft 180 degree tree. It screws right into my tree top ring with hooks that screws on to my 12 foot pole.
https://www.christmaslightshow.com/24-rgb-star-flare-metal-frame-only.html


Reply
Posts: 944
(@didjareally)
Noble Member
Joined: 12 years ago

I'm using a modified boscoyo topper on my 14' tree, I bought it with intentions of using a tfr and also decided against it due to not trusting it. I am instead building an asap pole and the boscoyo topper will now screw onto my inner pole.

IMG 20160919 165809 710

Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

I use the HC QT2 topper but screwed a 1" pipe flange on the bottom which mates to my center pole and put a 1/2" pipe flange on the top to mount a star. The pipe flanges do not have the same diameter so a thru hole will not line up. I just used #10 screws and made sure the screw holes where in different quarters on the top flange from the bottom flange.


Reply
Posts: 49
Topic starter
(@submarine-guy)
Trusted Member
Joined: 10 years ago
jnealand wrote:I use the HC QT2 topper but screwed a 1" pipe flange on the bottom which mates to my center pole and put a 1/2" pipe flange on the top to mount a star. The pipe flanges do not have the same diameter so a thru hole will not line up. I just used #10 screws and made sure the screw holes where in different quarters on the top flange from the bottom flange.

What pipe material are you using?

Sent from my iPhone using Tapatalk


Reply
Posts: 49
Topic starter
(@submarine-guy)
Trusted Member
Joined: 10 years ago
didjareally wrote:I'm using a modified boscoyo topper on my 14' tree, I bought it with intentions of using a tfr and also decided against it due to not trusting it. I am instead building an asap pole and the boscoyo topper will now screw onto my inner pole.

What kind of hooks are those?

Sent from my iPhone using Tapatalk


Reply
Posts: 49
Topic starter
(@submarine-guy)
Trusted Member
Joined: 10 years ago

I like the HC QT2 because the strips actually pass through

Sent from my iPhone using Tapatalk


Reply
Posts: 944
(@didjareally)
Noble Member
Joined: 12 years ago
submarine guy wrote:I like the HC QT2 because the strips actually pass through

Sent from my iPhone using Tapatalk

5/16 x 3" jbolts


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago
submarine guy wrote:What pipe material are you using?

I have a JUMP pole so it is all heavy duty galvanized electrical pipe. If I was starting over today I would build the ASAP pole. Similar concept but different raising and lowering methods and cheaper. but the JUMP pole is the first mega tree pole that I have never had an issue with and has worked great for several years.


Reply
Share: