I have 3 trees with Boscoyo strips and have not had any problems with twisting. For my OCD I always straighten out the light strings before I use them in any prop. If you look at my strings one side will always be the same color as you trace the wire and there will not be any twists in the wire. You just made me realize I was OCDing when I thought I never did that. LOL
I also straighten all the wires and if there is no wind, the strips don't twist. But even with straightened wires, the strips flutter and flap in the wind so I still use the basket weave technique to keep them all facing 'forward'
The premade strips appear to be quite flimsy and would require a lot of tension on the bottom if attached to a fixed or stationary top ring .
If you have a crank up top ring you are at an advantage for getting a perfect amount of tension on any type of strip used .
I learned quite a few tricks while building my new tree these past couple months .
Keeping each strip perfectly aligned as possible with the rest was paramount to me with this build as I did not want any strip to be tighter or looser than the others .
The key was to adjust the slack on all strips to equal the slackest strip then crank up the tension .
pixelpuppy wrote:I also straighten all the wires and if there is no wind, the strips don't twist. But even with straightened wires, the strips flutter and flap in the wind so I still use the basket weave technique to keep them all facing 'forward'
What is the basket weave technique?
Sent from my iPad using Tapatalk
pburton wrote:What is the basket weave technique?Sent from my iPad using Tapatalk
I think Walter Monk mega tree video shows it and how it's done.
Sent from my SM-G930V using Tapatalk
