Boyosco Strips
 
Notifications
Clear all

Boyosco Strips

11 Posts
10 Users
0 Reactions
4,997 Views
Posts: 200
Topic starter
(@dstokesdubois)
Reputable Member
Joined: 15 years ago
[#46575]

I just started hanging my 50 node strings that I mounted onto some 12mm strips. The strips want to twist in the middle unless I really crank down the tension to stretch them out. How does everyone else deal with this?


10 Replies
Posts: 357
Guest
(@jerry72)
Member
Joined: 13 years ago

It is actually not the strap itself, from what I have found it is the lights themselves causing it, especially if the strings are new. Make sure you have no twists in you strings.


Reply
Posts: 200
Topic starter
(@dstokesdubois)
Reputable Member
Joined: 15 years ago

That makes sense. Thanks.


Reply
JP90
Posts: 376
 JP90
(@jp90)
Reputable Member
Joined: 19 years ago
dstokesdubois wrote:I just started hanging my 50 node strings that I mounted onto some 12mm strips. The strips want to twist in the middle unless I really crank down the tension to stretch them out. How does everyone else deal with this?

I had extra of the strips and basket weaved it through the light strips at two places and used wire ties to keep it in place that way you don't have to crank down on the strips with the lights so much.

Gary


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago
JP90 wrote:I had extra of the strips and basket weaved it through the light strips at two places and used wire ties to keep it in place that way you don't have to crank down on the strips with the lights so much.

Gary

An added benefit, when you put the lights away - if you put them in a tub - they will be in order when you go to put them out again.
We do the "basket weave" at the bottom and on the 10s for the bigger tree.


Reply
Page 1 / 3
Share: