Keith, I'm glad to see your picture of the J hooks. I haven't found the locally yet, so I'm using 'S' hooks that work, but are a pain when putting up the tree.
Your photo shows the metal hose clamps keeping up the Boscoyo topper. I thought it was just how I was tightening mine that it didn't have the strength to stay up against the pull of the light strands. That's a really good idea.
CraigM wrote:Keith, I'm glad to see your picture of the J hooks. I haven't found the locally yet, so I'm using 'S' hooks that work, but are a pain when putting up the tree.Your photo shows the metal hose clamps keeping up the Boscoyo topper. I thought it was just how I was tightening mine that it didn't have the strength to stay up against the pull of the light strands. That's a really good idea.
That was last year's set up. Had to use the clamps in a pinch. This year using a modified Jump Pole (ASAP), and bolted a 1" pipe flange to the Boscoyo tree topper. It went together pretty good. Should have some 30 mph winds tomorrow and see how it holds up.
J bolts were purchased on Amazon here.
Each of my 24 strips has a MSIR clip on top. They hang on J hooks on a custom made Boscoyo top (24 strand). I welded two L irons to a piece of flat stock to form a wide C channel. Welded a floor flange to the inside of that. Floor flange on top of ABS top from James.
Bottom of each strip has one of my 3D printed hooks on it for the bungie cords:

Bungies attach to 8' diameter hoop.
Thanks very much Keith. Last year I said I was probably going to do a JUMP for my 5m tree. Well I didn't... Then, it took me so long to re-assemble my 5m tree this year (better part of 3 days) that I will NEVER use that design again. Also will probably move away from strips and go with nodes.
Wolfie wrote:
Bottom of each strip has one of my 3D printed hooks on it for the bungie cords:
Bungies attach to 8' diameter hoop.
Wolfie, do you have a picture of the bottom of your tree using these clips and how you use the bungie cords? I need to improve my tree design for next year and I am trying to gather up ideas.
Keith


