I have decided to go with the fence post idea... I am going to do a 20 foot tree with 3 guide wires. I was wondering what others have used for the top piece to hold all the light strands? I am going to have 32 strands of 100 lights going on this pole... Any advice would greatly help,,, and no I dont have any welding tools... Thanks Brad
I used the bun foot method. I had some weathering issues, but nothing too bad. If you're going to use the bun foot, I'd recommend a good heavy coat or two of paint and then a nice thick layer of exterior varnish. Those bun feet are basically a bunch a scrap glued together, and I don't think the glue is meant for exterior use.
Bun foot method is explained here.
http://christmaslightshow.com/doityourself/tree_topper.shtml
Personally if I were starting over, I'd just buy Darryl's metal one. Unfortunately I already spent my budget (ok, beyond my budget) on the 3-D star and strobes. I think by the time you spend the $$ on a bun foot, hooks, and flange to connect to your pole, Darryl's isn't much more.
http://www.christmaslightshow.com/xcart/product.php?productid=227&cat=25&page=1
Mark
im making a metal ring with 16 "pins" (im using 16 segments)(.25" bar stock) to hook the lights on and the whole thing will be raised (like a flag) when the lights are attached.
I have a welder so it makes fab easy.
scott
edit... just looked up darryl's... mine will look about the same and $25 is a great price for having it made for you
i will have $12 in mine plus the time to fab it
