Wayne J wrote:I put mine up the weekend after Halloween. 😉
I had all the trick-or-treaters asking what the tower was for 😛
Hey, I have a quick question about my mega tree base. I used the grey flex pipe from HD and two sections joined together to form my base. I didn't use any PVC cement or anything of the sort at the connections as they seemed pretty snug.
Is there any chance that due to temperature changes the connections might work loose? I wonder if I should put a screw or something at each connection.
Since I have the tree all set up I don't want to split the pipe or have something catastrophic happen. Although, it would be a catastrophe if the connections worked loose.
I guess I could always check them periodically too.
Superfreak3 wrote:
Is there any chance that due to temperature changes the connections might work loose? I wonder if I should put a screw or something at each connection.
Seems like Murphy's law is somehow appropriate here... although ALL the PVC pipe should be affected in like fashion because they're all in the same environment.
You might get some black Gorilla tape (essentially duct tape with a black backing) and wrap your junctions with that -- at least it will help solidify some things!
I like that idea for starters anyway.
I can just see my self drilling a pilot hole for a screw and the darned pipe cracking. I think I would just sob.
Ill I did last year was put the pipe together. It held all year and I still almost couldn't get it apart. I used the same pipe this year for the Skirt loop. Seems fine thus far. If you want use the tape but I wouldnt go drilling holes. And for temp change we have been getting some good spreads here in So Cal. (85 to about 40).
--Greg
