Alternate Anchor Me...
 
Notifications
Clear all

Alternate Anchor Method for Mega Tree Strings Needed!! ???

19 Posts
11 Users
0 Reactions
7,229 Views
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago
[#8745]

Hi all,

I'll try to keep this as short as I can. My current plan was for this year, first using a Mega, to concentrate more on the sequencing and overall visual effect of the tree rather than the framework itself.

Next year, a more reusable/year-by-year permanent structure would be constructed.

Ok, so this year's frame was to be constructed using a water weighted base basketball standard. For the base, I found some fairly heavy flexible piping/conduit at Home Depot that formed a nice circle using two sections. The only problem that if I lay the base on the ground to surround the bball standard and base, the poll is off center. To have the pole centered, the water weighted base must cover the base circle partially.

I initially thought that this would be OK as I would simply attach the strings that would come down over the basketball to the ground somehow. I was then going to attach the other strings to the piping base with wire tires or something like that. Then I thought they might slide around.

I then thought I would raise the piping base a bit so that the pole would be centered within it without being covered at all. What to raise the base with would be the next question.

I'm now thinking of maybe attaching the strings directly to the ground or just above it I should say individually.

I'm wondering if there are any good plastic or pvc stakes that might accomodate this conceptualization.

I know you get out what you put in, but I really haven't had the time to construct something more viable and time is running out. I need a Mega Tree makeover quickly.

Any thoughts, tips, help would be GREATLY APPRECIATED!


18 Replies
dnesci
Posts: 563
(@dnesci)
Honorable Member
Joined: 19 years ago

The circle for my bottom of my tree is made out of 1/2" flexible gray pipe form Home Depot. It is vary flexible. I use 3 10' sections. It is raise 12" off the ground. To do this I use 3/4" sch 40 pipe (white color) and 3/4" T's. The gray pipe easily passes thru the t's. I afix this setup to the ground by cutting 1/2" conduit 18" long. I pound 6" into the ground and slip the 3/4' plastic leg over it. I then insert a sheet metal screw thru the plastic leg into the conduit. I use 8 legs. It is solid and holds the tension of the light strings from the top pole to the base ring.

My tree is 15' tall and I have not problems with this set up.


Reply
Posts: 1079
(@bmcgeeny)
Noble Member
Joined: 18 years ago

All this make this attach this use this water filled stand put 100 guy wires use a cable and winch blah blah blah sounds like a lot of work.

One 10' tall 4" PVC pipe standing straight up with a PVC cap on it, holes drilled for S hooks. I think this next part may be over kill but I use 3 5' T fence posts driven in to the ground right next to it and 3 plumbers clamps around the posts and 4" pipe. I'm debating if I need the posts this year.

Hook one end of the light strings to the S hook, the other end (with the male plug) gets a lawn staple to the ground, leaving the last bulb about 6" off the ground.

24 4 color strands zip tied together each lawn stapled to the ground and this thing does not move.

Put it up as tight as you can, wait a day or two, go out and tighten the strands up a little and it's good for the year.

Now some may say it's not really a Mega Tree because it does not meet the minimum reguired 13' 6" height, but 10' is good enough for me.


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

Oh yeah, I'm with you on the height requirement thing. Mine is probably going to be 9 - 12 max.

All good ideas.

I think I'll look into the lawn staples this year and the pvc t's to raise the base next year.


Reply
scottmcm
Posts: 621
(@scottmcm)
Prominent Member
Joined: 19 years ago

My version of the lawn staple is a cut end from a shirt hanger. I cut the left and right angles off and get two per. Cheap and disposable. Works for my mega tree and mini trees.


Reply
Page 1 / 4
Share: