30' PVC Mega-Tree
 
Notifications
Clear all

30' PVC Mega-Tree

21 Posts
11 Users
0 Reactions
9,949 Views
Posts: 36
Topic starter
(@mwalz)
Trusted Member
Joined: 13 years ago

Well right now i currently have a 15' mega tree with 24 light strands and 1 1/2' pvc, its hard to raise but once its up i do not have any problems with it. I will look in to those telescoping poles


Reply
Posts: 36
Topic starter
(@mwalz)
Trusted Member
Joined: 13 years ago

Would something like this work? I don't have an experience with these type of poles but i assume i would have to be concreted in, and would i need guide wires?

http://www.3starinc.com/rohn_h30_telescopic_antenna_mast.html


Reply
timon
Posts: 2149
(@timon)
Noble Member
Joined: 16 years ago

When you get to 30' the physical forces, load and wind, are not in you favor. You need to engineer it well so it does not come down. I figure 10 to 12 feet you can get away with PVC, anything over that you want steel. When you get up to 30 or 35 feet or more I'd start looking at small radio tower sections with a 6 to 8" face and with really good anchors for the guy wires. When you get that tall the wind loading on the lights can get quite high much like a large Ham radio antenna.if it falls it can easily fall into your or your neighbors house or worse yet it could fall on someone.

OMT, If not engineered well you insurance may not pay out on a claim and you would be stuck with the bill.


Reply
DanielSkeen
Posts: 438
(@danielskeen)
Honorable Member
Joined: 14 years ago

A pole that automatically destroys itself???

Yea, so much for auto corrupting software....


Reply
JasonPortwood
Posts: 753
(@jasonportwood)
Noble Member
Joined: 17 years ago

I always suggest a JUMP pole. http://www.magicchristmasnews.org/magic_christmas_news_002.htm

It's worth a look and can get to the height you want I believe.

Jason


Reply
Page 2 / 5
Share: