Want to build a 30' mega tree next year and would it be ok to use 3" sch 40 pvc? I would have one 20' section and one 10' section screwed together with threads. Would this be stable enough for 30'? I really don't want to use any steel pipe because that could get real heavy at that height. I would have at least 6 guide wires on it. Also what is a good way to build a pulley system for something like this? The 3" SCH 40 would be strong enough but it is more of a concern standing up with a few thousand lights attached on it. Any help is much appriciated
Also first post here!
I have not run the numbers but I suspect anything over 10-12 feet in 3" pvc would require reinforcement, special couplers, guy wires...and on and on.
It might be much simpleir for a tree of that size to use a self razing metal pole from the start.
I don't think it would work. I have a 20 ft with 72 strings. 16 guy wires. On a four section aluminum flag pole. I can't lift it by myself and I believe I have overloaded it. Another ten feet is a much larger load.
Sent from my SCH-I545 using Tapatalk
Look into the telescoping poles that allow you to crank them up from the ground.
I think that if you take a look at the Wiki and do a few searhes on the subject you might find something useful.
DanielSkeen wrote:self razing
A pole that automatically destroys itself???
don't mean to make fun of you, but this is one of those funny cases where the misspelling makes the word mean the complete opposite. I've made more than a few "self-razing" contraptions. Now i have a word for it!
