Notifications
Clear all

P10 Hookups

80 Posts
11 Users
0 Reactions
29.4 K Views
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago
[#44287]

I am going to build a 5 panel W X 6 panel H P10 matrix. I am using Ron's Raspberry Pi Matrix adapter which can handle 12 panels per output (36). So I should be okay.
How do I actually connect the three outputs of the adapter to the rows of the P10 panels? I understand that that panels in each row are interconnected with ribbon cables but beyond that I can't see it.

Thanks


79 Replies
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

removed - wrong data - see later post


Reply
Posts: 171
(@dmjpixel)
Estimable Member
Joined: 11 years ago

Here is a 3w x 4h matrix I built. I'm using Ron's board and I chained the 1st 6 panels to one output and the 2nd 6 to another. Everything mounts in base - I just have it hanging while I was working on it. Hope this helps.

Sent from my iPhone using Tapatalk


Reply
Posts: 171
(@dmjpixel)
Estimable Member
Joined: 11 years ago

One other note, I use these 5 terminal boards from Amazon for power connections - basically I have 2 for positive and 2 for ground then these tie back to PS as well as the Pi power connector from Ron's board.

Sent from my iPhone using Tapatalk


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Maybe this FPP page will also help.

COSps

Reply
Posts: 171
(@dmjpixel)
Estimable Member
Joined: 11 years ago
mrGrumpy wrote:Maybe this FPP page will also help.

Very nice!


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

Thanks everyone - I am so excited I want to start today - but guess I should wait till after Christmas. I hope everyone has a great Christmas!


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago
DMJPixel wrote:One other note, I use these 5 terminal boards from Amazon for power connections - basically I have 2 for positive and 2 for ground then these tie back to PS as well as the Pi power connector from Ron's board.

I can't tell from the picture, but are they fused? Also, does the shorting bar come with it?


Reply
Posts: 171
(@dmjpixel)
Estimable Member
Joined: 11 years ago
algerdes wrote:I can't tell from the picture, but are they fused? Also, does the shorting bar come with it?

Currently not fused but now that I have some power dist boards I am going to go back and integrate some fusing.

Here is the Amazon link, it did come with the bars.

https://www.amazon.com/gp/product/B010UDG6NG/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A31P8DECE97940

Sent from my iPhone using Tapatalk


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Just to share some ideas.....I used 3-point terminal board and resettable fuses. Black lead is power from PS and reds go to 2-P10 panel. This is a 12 panel setup, with 3 fused distribution points.

19ma

Reply
Page 1 / 8
Share: