Matrix Width x Heig...
 
Notifications
Clear all

Matrix Width x Height ratio

5 Posts
3 Users
0 Reactions
3,483 Views
Posts: 141
Topic starter
(@jspiker77)
Estimable Member
Joined: 11 years ago
[#41292]

I am looking for a little advice on the proper ratio between width and height ratio. I am planning on putting matrix's (2" spacing) on my front gates (168" Wide x 27" High) this year. I am concerned that the width to height ratio is too great. Any thoughts on proper ratio's, attached you will find a picture of my house to give a visual representation.

Our House Street View

4 Replies
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

All depends on what you want to display. Yours is pretty wide, but would be great for scrolling text. Not so much for graphics and definitely not good for video.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Kelly is absolutely right. It depends what you want to use it for. And how you use it. If you're at the skill level where you want to use prexisting content and just add it to your sequence, you'll want to build a matrix in a standard aspect ration. But if you have the skills and tools to get creative, the sky is the limit. Think of those led ribbon boards that you see in pro sport stadiums, often running the entire length of a balcony rail or a wall. They're often hundreds of feet wide but only a few feet high. This is exactly the situation you're thinking about. Though to the extreme. Long text is a natural fit. When it's pictures, it can often be the same picture repeated several times to fit the width. You have to be creative in how you fit what you have to the space. And often you need to preprocess the content to make it work.
You can certainly put pictures or video on it, but you need to consider the aspect ratio of the content you have vs the ratio of the display. For graphics you can simply prepare your graphics files by creating them in the actual pixel dimensions of your matrix (in pixels, not inches) you can create the graphics to fit appropriately. You can always stretch any picture to fit. But you can only go so far before it starts to look bad.
Video has a few standard aspect ratios. 4:3 for standard SD video, or 16:9 for hd type content. If you want to use standard video files in your matrix, One approach is to subdivide the total area to create a "window" that matches the aspect ratio of your video files. So instead of using the whole matrix for the video, you're only using part of it for that content. You can then use the rest for other effects to frame the video.
You can also create video files in any aspect ratio you like. Much like I described for picture files, you can make the video files to match the matrix. I do a lot of professional productions where we use all sorts of crazy dimension ratios to make a stage set. When doing this, we often have to make custom video content to fit the screen. Or if we're starting with existing video assets, we'd have to somehow transform it to fit the aspect. There's a lot of techniques that can be employed from cropping and scaling to windowing and framing. But doing this assumes you have access to fairly high end video editing software and know how to use it.

--Jon Chuchla--

Sent from my iPhone using Tapatalk


Reply
Posts: 141
Topic starter
(@jspiker77)
Estimable Member
Joined: 11 years ago

Thank you both for the input. This being my first year using pixels I have have a lot to learn. More than likely I will see about segmenting the matrix so that I can achieve the different aspect ratio's. For picture editing I currently use Adobe Photoshop and more than likely will just create custom graphics to match the pixels. I do have Adobe Premier for video editing but have never really used it to its full extent, I've only done instructional videos for my software, that's going to be an uphill learning curve. My original plans never included the matrix but my wife wanted a mega tree that after creating the 3D model of my house and the slope of our property I realized it would not work. That being said I had already ordered everything for it so why not put the pixels to use.


Reply
Posts: 141
Topic starter
(@jspiker77)
Estimable Member
Joined: 11 years ago

Well after some prototyping and calculating aspect ratio's I have scrapped the matrix's across my 4 front gates just not tall enough. I did settle on one matrix on my rolling gate though that will be 50 x 28 at 2 inch spacing this give an almost perfect 16:9 ratio. I'm also considering 1.5 inch spacing as the viewing distance will only be about 15 feet. The fun part now is figuring out how to mount it to allow for the gate to open and close with the matrix on it, still need to be able to get in to my driveway.


Reply
Share: