ok folks thinking caps on please.
75 x 20 matrix , ink1003's. Using pixlite4 as controller. That's working fine , test mode and with Da-E131.
Use Hls and get scrambled results, ie test sequence is messed up partially - can figure parts of words and snowflakes as they fall othe effect bars/diagonals etc pretty patterns but not what was planned.
Run a slow chase across all rgb channels and find that last 20 pixels of each universe fail to light up ( this happens in other effects (including using HLS PP editor as well as NC/XL))
even when nc/xl are checked to be 'fixed' and they don't need to be, results are still scrambled, so assume NC/xl maybe ok for config.
This leaves HLS as the culprit and I have no idea how to fix or sort this out.
have tried multiple scenarios, configs etc but I'm missing something because I cant fix it , hence the plea for help
cheers and thanks in advance to all replies
Boof63:sad:
I have one similar to this but using an E6804 to run it and using XL/NC to sequence it.
A few things first, how is it wired? Do you zig-zag a few rows on each output? Have you compensated for that in your model or controller? I have never used a pixlite but I am assuming it is similar to the E68x controllers, in mine I set my zig-zag length right in the controller to compensate for my wiring so my sequencer see's the pixels as if they are all wired left to right. When I have this wrong it comes out like you describe. just all scrambled up.
Can you run a test pattern on the pixlite directly? If so check that out first with a pattern and see if it is correct there first, then you will need to work your way through your addressing/model to try to locate where things are going out of whack.
thanks for help but zig zag don't do it and still missing last 20 pixels per universe, really pulling the hair out now , But will go blow some thing up on the Xbox, Bye for now
cheers Boof63
I agree 100% with Bill , get every thing working correctly with the controller and test patterns locally first .
Once that is achieved you can add others like HLS or NC/Xl into the mix .
That is the problem, Pix4 works in test pattern and DA_E131, after that it all turns to shit!! yes I'm frustrated!!
5 days and no solution!!
cheers Boof63:(
What is DA-E131?
Is this one matrix unit or is it multiple small matrix units being placed together to form 1?
Do you know the exact order of pixels?
Have you tested that order to confirm it is correct?
I would suggest starting at what I would consider the very beginning and move forward in baby steps.
Take a tool that allows you to turn on individual pixels. Make sure the tool allows you to map that into something like --- for E131 --- Universe and channel.
Illuminate every pixel and note what Universe and channel the pixel belongs to.
I know this is detailed and I bet you think you know --- but your issue suggests the order somewhere is NOT what you think it is.
Canned test patterns can hide some order errors --- that is why I suggest pixel by pixel --- yes it will take some time but you will then KNOW your order and I suspect you will identify your issue.
Joe
Da_E131 is test free program available at this web site :- http://www.da-share.com/software/da_e131/
Have tested individual strings/universe nothing I can see
ok do I need to rewire my strings
Here is actual Physical layout, is this part of my problem.
output 1 -> 1------------- >--------------75
150--------------<--------------76
151--------------->-------------225
300---------------<-------------226
301---------------->------------375
450---------------<------------376 <- Output 2 is starting here
451--------------->------------525
600---------------->-----------526
601--------------<-------------675
750---------------->-----------676
Output 3-> 751-------------->---------------825
900---------------<--------------826
901---------------->-------------975
1050--------------<- -----------976
1051--------------->-------------1125
1200--------------<------------1126<- Output 4 starts here
1201-------------->------------1275
1350--------------<------------1276
1351------------->-------------1425
1500-------------<-------------1426
Cheers Boof63
Have changed XL/NX setup to as follows
Out of curiosity -- you don't have your test program running at the same time you have hls running too? Because then both programs will be throwing packets at the controllers and the display will flash back and forth between the two different patterns as best they can.
NO sorry Shockwave, truly wish that was the case, an Ahha / lightbulb moment would be most helpful, but thanks for the input
cheers Boof63
You stated you test Universes and you tested strings -- you did NOT state you tested pixels.
You did not state how you matrix is formed -- by one unit or multiple units.
You may be wiring it for how it should work but if you have multiple units -- who is to say THEY are all wired the same --- THAT is why I suggested you test at the pixel level.
Joe


