Hi all,
I am having some problems with the shimmer effect in my display. I have five LOR controllers and this year I added a renard ss8. To add the renard I had to switch everything to DMX. Now there is a cat-5 crossover between the LOR controllers and the renard. I am running everything off of a laptop running LOR software in the garage. My shimmer effects worked fine last year but this year all the lights that are hooked up to the LOR controllers just kind of blink randomly but the lights hooked up to the renard shimmer fine. This seems weird to me because the renard is at the end of the daisy chain of cat-5 cables. Any Ideas?
I believe the problem is that Shimmer is an LOR board effect that’s controlled on the native network. If you run the controller in dmx, the LOR board effects won’t work. You could get a second dongle, and create two networks. One LOR network so you don’t run them in dmx and lose the special effects, and one dmx for your Renard.
Jeff
Jeff Millard wrote:I believe the problem is that Shimmer is an LOR board effect that’s controlled on the native network. If you run the controller in dmx, the LOR board effects won’t work. You could get a second dongle, and create two networks. One LOR network so you don’t run them in dmx and lose the special effects, and one dmx for your Renard.Jeff
I forgot to mention that the twinkle effect works fine. The renard board also responds to the twinkle and shimmer effects.
