LOR and D-light con...
 
Notifications
Clear all

LOR and D-light controllers

7 Posts
3 Users
0 Reactions
4,050 Views
Posts: 5
Topic starter
(@sirrob28)
Active Member
Joined: 16 years ago
[#38823]

Hey guys, I have been running my LOR controllers for about 5 yrs now. We have inherited a D-Light control AC-16. I have no idea of the history on this box. I tried hooking it up to the pc using the LOR 485B adaptor. The light went steady but none of the lights worked. I am wondering if this box will even work with the LOR boxes. Any input would be great.


6 Replies
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

According to the ACx16 Gold User Guide (located at http://www.d-light.us/index.php/manuals-downloads/category/3-manuals ), you need to set it up using the D-Light Hardware Utility (located at http://www.d-light.us/index.php/utilities-downloads ).

I'm actually surprised that the site is still up.


Reply
Posts: 5
Topic starter
(@sirrob28)
Active Member
Joined: 16 years ago

Will I need a special adapter or will the LOR 485B work?


Reply
Posts: 3
(@unibits)
New Member
Joined: 12 years ago

Depending on the version that is on the AC-16, there may even be DMX firmware on the PIC. We created a DMX firmware a few years back to make sure all the D-Light hardware would last into the future

If it is the original D-Light code, you will need the hardware utility so you can set the address. There is no way to know what firmware is on it but you could easily change out the PIC and make it DMX. I have the package it you want it. You will need a pickit 2 and a clean unprotected pic chip. That may be the best way since the D-light and LOR effects were substantially different with different iterations of the PIC code.


Reply
Posts: 5
Topic starter
(@sirrob28)
Active Member
Joined: 16 years ago

Thanks for offer! I finally got the D light hardware utility to find the box. Its AC-16 1.13 version. Even tho the utility found the unit I still can't get any lights to work with the unit.


Reply
Posts: 5
Topic starter
(@sirrob28)
Active Member
Joined: 16 years ago

When I tried using the D-Light Firmware Updater it tells me the D-Light USB485 V2 not found.


Reply
Posts: 5
Topic starter
(@sirrob28)
Active Member
Joined: 16 years ago

ok I have just restarted everything and the lights work of the D light utility but not on the LOR program.


Reply
Share: