Triks-c driver prog...
 
Notifications
Clear all

Triks-c driver program

84 Posts
25 Users
0 Reactions
39.2 K Views
Posts: 121
(@vairmoose)
Estimable Member
Joined: 19 years ago

PD.

If I am understanding Tim's guidance, LTC must be opened in the CMD window with the appropriate text typed after "LTC" on the same line. Example (taken from a previous post):

LTC example.led #FRM #DLY200 #CLS

Then press

Larry


Reply
Posts: 282
(@ponddude)
Reputable Member
Joined: 18 years ago

Well, that is what I figured. Now I really have an issue. As soon as I touch a key, the cmd window shuts down.

Now what?


Reply
Posts: 121
(@vairmoose)
Estimable Member
Joined: 19 years ago
Ponddude wrote:Well, that is what I figured. Now I really have an issue. As soon as I touch a key, the cmd window shuts down.

Now what?

Are you running XP or Vista? In XP, the CMD window is created by running command.com either from a shortcut or thru the cmd window in the Start. The window stays open until you force it shut.

I'm assuming that Vista works the same.

Larry


Reply
Posts: 282
(@ponddude)
Reputable Member
Joined: 18 years ago

I am running XP for my LEDTriks panel.


Reply
TimW
Posts: 554
 TimW
Topic starter
(@timw)
Honorable Member
Joined: 19 years ago

Hi

I'm pretty sure this (shutdown) is what happens when you run LTC directly or when you run 'batch files' directly....

you need to get the cmd window to stay there and accept commands

from the windows desktop Click START (once) ... select RUN.... type CMD into the box and hit enter. A black window should open up and have a prompt. Now you can click into the cmd window and type stuff...change directory (using cd command) to wherever LTC is. Then run it with commands... LTC filename.led #frm etc etc

All of this happens before LTC runs. Its a windows thing and should work the same way every time for everyone...

Does it work to there on your system?

Tim


Reply
Page 7 / 17
Share: