Triks-c driver prog...
 
Notifications
Clear all

Triks-c driver program

84 Posts
25 Users
0 Reactions
39.2 K Views
Posts: 107
(@michael-sullivan)
Estimable Member
Joined: 19 years ago

The new speed version seems to be working a charm.

Michael


Reply
daviddth
Posts: 925
(@daviddth)
Prominent Member
Joined: 19 years ago

Works great. For those upgrading the program, delete the triksc.dat file and run LTC again. Set up the com port and default timings. I left all the timings as default as there MAY be times I want the speed high, but it's unlikely.

The command line should now be "ltc test.led #fdlxxxx #frm" where xxxx is your delay. On the Quad core Q6600 I found 50 to 200 gave good animation results depending on what I wanted. The #fdl has to go before the #frm as the program parses the commands in order - no point making it add a delay AFTER you send the sequence as I was trying to do lol

The way it's set up is excellent as you can string commands and change the delay for each file like: "ltc snow.led #fdl100 #frm snow.led #fdl1 #frm snow.led #fdl500 #frm"


Reply
daviddth
Posts: 925
(@daviddth)
Prominent Member
Joined: 19 years ago

Tim, 1 thing - theres no way of changing the rotational delay time from the command line, but there is that value in the .dat file.


Reply
TimW
Posts: 554
 TimW
Topic starter
(@timw)
Honorable Member
Joined: 19 years ago
daviddth wrote:Works great. For those upgrading the program, delete the triksc.dat file and run LTC again. Set up the com port and default timings. I left all the timings as default as there MAY be times I want the speed high, but it's unlikely.

yeah... should have mentioned that you need to delete the triksc.dat file as part of the upgrade.

The default timings are there so you don't need to use the #fdl etc command etc every time... if you want.

daviddth wrote:The #fdl has to go before the #frm as the program parses the commands in order - no point making it add a delay AFTER you send the sequence as I was trying to do lol

Yes - it parses in order - try LTC file.led #frm #time to see how long the execution of a file takes - (the #time has to be at the end!). This is useful to see how long you need to wait in the sequence before you should call LTC again.

daviddth wrote:The way it's set up is excellent as you can string commands and change the delay for each file like: "ltc snow.led #fdl100 #frm snow.led #fdl1 #frm snow.led #fdl500 #frm"

or even "ltc snow.led #fdl100 #frm #fdl500 #frm"

and if you want to do it for a while... "ltc snow.led #fdl100 #frm #fdl500 #frm #rpt300"

someone ought to write a manual... any takers? 🙂


Reply
daviddth
Posts: 925
(@daviddth)
Prominent Member
Joined: 19 years ago

The repeat is an interesting idea, but I'd also like to see an addition to that, but it's not critical - repeat something X times, rather than your current "repeat for X seconds". I might not use it, but then again I might 🙂

I didnt realise you could repeat something with different parameters without specifying a file again - I gather it just does them on the currently loaded file, cool, and makes sence

Dave


Reply
Page 3 / 17
Share: