Triks-c driver prog...
 
Notifications
Clear all

Triks-c driver program

84 Posts
25 Users
0 Reactions
39.2 K Views
TimW
Posts: 554
 TimW
Topic starter
(@timw)
Honorable Member
Joined: 19 years ago

Here is where I've got to today

- using the launcher plugin, setup a channel to fire off various different LTC script files

The video is of a test 16x16 panel I have been using - inside my XMUS Wreath.

All the Ledtriks animations and text built in Vixen (except the rotation).
Vixen controlling the launch via LTC during the sequence (from a dedicated channel)
Single laptop running the lights and Ledtriks/Triks-C interfaces


Reply
Posts: 215
(@shocker)
Reputable Member
Joined: 19 years ago

That was very nice I have all my part just waiting for the pcb 😉


Reply
daviddth
Posts: 925
(@daviddth)
Prominent Member
Joined: 19 years ago

Thanks Tim. See the other thread for comments on the LTC.exe "issues" I have at the moment - it's too darn fast! A happy change over the CPU sucking Ledtriks before 🙂


Reply
TimW
Posts: 554
 TimW
Topic starter
(@timw)
Honorable Member
Joined: 19 years ago

UPDATE 13/10

OK - Thanks for the feedback Dave.

Version 0.3 is now posted.

-It has delay parameters on the command line to specify how fast to scroll.
-It has a new command #time to report on how long the commands took to execute (useful for figuring out how long to expect the sequence to run in vixen)
-The delay parameters can be remembered when you set up TriksC.dat
for now that will let us customise each instal to suit everyone's pc

Obviously once some 'real' code is written we would try and sync these speeds to a timer and make them independant of processing power. For now, I think it will work.

Let me know...

Tim


Reply
daviddth
Posts: 925
(@daviddth)
Prominent Member
Joined: 19 years ago

Thanks Tim. Yeah the code can be cleaned up or made into a plugin later - at least this will be able to allow us to test & run this year with a little tweaking.


Reply
Page 2 / 17
Share: