LED Matrix
 
Notifications
Clear all

LED Matrix

29 Posts
15 Users
0 Reactions
13.2 K Views
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago

Everything I have on my Triks construction is at:
http://www.kevincook.net/Hobbies/Electronics/Lights/LEDTriks/index.htm
There are a few close ups of the initial blocking I put in to support the board - I added more later...


Reply
XmasInGalt
Posts: 526
(@xmasingalt)
Honorable Member
Joined: 19 years ago

Kevin,
In the picture of your completed LEDTriks (by the way, it looks great), I noticed a thin piece of wood in the center of the box. Is that because the plexiglas is in two pieces or is it for support (or both). I'm getting ready to build mine and would love to learn from your experience building one.

Thanks,

XmasInGalt.


Reply
Posts: 277
 rca
(@rca)
Reputable Member
Joined: 18 years ago

Kevin,

Did you attach the LEDTriks boards to the frame backing? Did you do anything to protect the boards from the elements?

Ron


Reply
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago
XmasInGalt wrote:Kevin,
In the picture of your completed LEDTriks (by the way, it looks great), I noticed a thin piece of wood in the center of the box. Is that because the plexiglas is in two pieces or is it for support (or both). I'm getting ready to build mine and would love to learn from your experience building one.

Thanks,

XmasInGalt.

Yes - The Plexiglas is in 2 pieces, and that strip (and a big line of caulk) seals the center.


Reply
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago
rca wrote:Kevin,

Did you attach the LEDTriks boards to the frame backing? Did you do anything to protect the boards from the elements?

Ron

Hey Ron,
Yes - I did attach the board to the frame, and I sealed the frame and the plexiglas cover with caulk to protect it from rain...


Reply
rlilly
Posts: 993
(@rlilly)
Noble Member
Joined: 19 years ago

If you are getting ready to build, consider the plexiglass cover you'll eventually need.

These come in a maximum of 6' lengths from Home Depot. If you get bigger than this size, it will be a custom order (expensive).

I built my 1x2 Triks with 3/4" LED spacing and the 6' cover length works without breaks.


Reply
XmasInGalt
Posts: 526
(@xmasingalt)
Honorable Member
Joined: 19 years ago
rlilly wrote:If you are getting ready to build, consider the plexiglass cover you'll eventually need.

These come in a maximum of 6' lengths from Home Depot. If you get bigger than this size, it will be a custom order (expensive).

I built my 1x2 Triks with 3/4" LED spacing and the 6' cover length works without breaks.

Bob,

I'm looking to do 3/4" spacing. Did you drill the holes yourself or did you find a peg board with 3/4" spacing?

Thanks.


Reply
rlilly
Posts: 993
(@rlilly)
Noble Member
Joined: 19 years ago

I drilled them using a template much like cobraman did. Heres a picture of cobraman's elves in action. Unfortunately I had no elven help.

I first cut two panels, clamped them together, then drilled the holes through both panels. You cut the number of holes to drill in half that way.

Edit:
Cobraman's been doing some modifications at his web site and the link was broken. You'll have to install Silverlight to be able to view his pics.


Reply
XmasInGalt
Posts: 526
(@xmasingalt)
Honorable Member
Joined: 19 years ago
rlilly wrote:I drilled them using a template much like cobraman did. Heresa picture of cobraman's elves in action. Unfortunately I had no elven help.

I first cut two panels, clamped them together, then drilled the holes through both panels. You cut the number of holes to drill in half that way.

Great idea (do two at once) and thanks for the picture. That's exactly how I'm going to do mine.


Reply
tconley
Posts: 410
(@tconley)
Honorable Member
Joined: 19 years ago

the elves need little green hats though.... 🙂


Reply
Page 2 / 3
Share: