Notifications
Clear all

Stage lights

20 Posts
11 Users
0 Reactions
10.7 K Views
pmiller
Posts: 2795
Topic starter
(@pmiller)
Famed Member
Joined: 12 years ago
Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

No, it isn't. But you don't have to go with Martins. There are cheaper alternatives, but not quite as good. (Yes - I wanted Martin movers and Christy projectors in my sound/light business at one time. Then I was given the choice of the lights, or eating... 🙁 )


Reply
Posts: 2229
(@plasmadrive)
Famed Member
Joined: 15 years ago

Toms are 230Watt


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

The one thing that I would want as a feature is the ability to change the beam width from a thin "laser" to a wide fountain. The ability to use gobos would be desirable as well.


Reply
john2571
Posts: 66
(@john2571)
Trusted Member
Joined: 14 years ago

We have been using moving heads in our display for a few years now. If you want to see the actual beam of the fixture, the smallest you can realistically look at is a 5r lamp for beams and something in the range of 1200-1500 watts for profile or spot fixtures. We use Chauvet Rogue R2 Beams for beam fixtures, Martin Mac III profiles, Vari-Lite VL2500 spots, and Martin Mac Vipers for spot fixtures(depending on the year). We have used smaller LED fixtures (Martin Mac 101, High End Systems Shapeshifter C1) with some success, although all you will get from smaller LED fixtures is eye candy effects, which only work well when used in larger arrays. If you are looking to use smaller LED moving heads to illuminate something like trees or your house, you might be better off spending your money on waterproof LED pars (personally I like the Elation sixpar 200 IP).


Reply
Posts: 241
(@mrdudeman)
Reputable Member
Joined: 12 years ago

@algerdes: check out the Focus Spot Three Z.

Seeing the beam isnt gauranteed. Getting a fogmachine or haze machine will help, but then you have to worry about the wind


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago
algerdes wrote:Are they really down that cheap, or did you miss a zero?

the $300 is just for the lamp.


Reply
Posts: 2229
(@plasmadrive)
Famed Member
Joined: 15 years ago
john2571 wrote:We have been using moving heads in our display for a few years now. If you want to see the actual beam of the fixture, the smallest you can realistically look at is a 5r lamp for beams and something in the range of 1200-1500 watts for profile or spot fixtures. ... snip.....

I am thinking you must have mis-typed the wattage rating.. 230 watt heads are what Tom BetGeorge uses on his and they are fabulous for beams.. I have never seen a moving head with 1200 watts plus in a small package... Maybe Syncrolite, but aren't they out of business?


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

These may be more suited for the budgets on this site 🙂

LMAO ( ͡° ͜ʖ ͡°)


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

too funny

angus40 wrote:these may be more suited for the budgets on this site 🙂

lmao ( ͡° ͜ʖ ͡°)


Reply
Page 2 / 2
Share: