RGB floodlight - ne...
 
Notifications
Clear all

RGB floodlight - need input

11 Posts
8 Users
0 Reactions
5,154 Views
JasonPortwood
Posts: 753
Topic starter
(@jasonportwood)
Noble Member
Joined: 17 years ago
[#19926]

Holiday Coro has that LED floodlightwhich looks really good. Has anyone personally tried it yet?

I was also thinking about the LED modules. Couldn't you take 5050 strips and do the same to cover the piece of coro but run them both diagonal and horizontal? Like a basic weave of sorts. I would think that would give you more light. Anyone have any thoughts on that?

I'm thinking about buying a few of these and an extra board to try my idea out if that's worth a shot.

-
Jason


10 Replies
Posts: 154
(@scubaspookf)
Estimable Member
Joined: 16 years ago

I did not buy the flood kit however I did build my own flood using their leds as I do not use DMX so I didn't need the extra stuff. I used 7 of their leds modules and placed them in my own enclosure and ran them from the Renard 48LSD and Vixen and they worked quite well and I could not tell any difference in brightnes compared to the DIYC Floods. The plus side is no soldering and if you order 7, 10, or 20 they come all attached.


Reply
JasonPortwood
Posts: 753
Topic starter
(@jasonportwood)
Noble Member
Joined: 17 years ago

Side note for those doing this: That enclosure HC sells, the utilitech, is out of stock at my areas Lowes and looks like they are dropping them (no restock for some time / what the salesperson said) and I checked two of them. Homedepot has a similar enclosure but bright yellow, would rather not have yellow.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago
aixelsyd wrote:Homedepot has a similar enclosure but bright yellow, would rather not have yellow.

It's OK to paint it, we won't tell anyone.


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

Mine are now black... they look much better black. (oh.. and a nice shiny coat of silver/chrome on the inside)

ErnieHorning wrote:It's OK to paint it, we won't tell anyone.

Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

I bought the Home Depot 500W enclosures where were black with yellow exterior mounting parts.
I sanded and painted the outside parts. Everything is now flat black. Look good I think.


Reply
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago

What kind of paint did you guys use, and how did you prep the enclosure? The paint on the HD floods I bought last year is an enamel-like paint and my green paint on top flakes off when you just look at the enclosure.


Reply
dirknerkle
Posts: 10311
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
ErnieHorning wrote:It's OK to paint it, we won't tell anyone.

Whaddayamean? Of COURSE we're going to tell everyone!!! 😆

You might try high-temperature paint -- for barbecues, engines, etc....


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago

I've been using some standard "spray" paints. First attempt was with a flat black primer, typically used on plastic. It looked good, but when I sprayed a black enamel on top, it began to go all "wrinkly" (technical term).
It was a disaster as the underlying primer started to crack and shrink, allowing the yellow to show through. A second coat of enamel fixed the cracks, but the surface was not clean/smooth. As they are mounted high on the house, and will be viewed at night, I opted to simply leave it alone.

The second test was with "rustoleum" black enamel directly atop of the yellow. (Dis-assembled to lamp to remove the glass first). It worked MUCH better, and gave a clean touch enamel finish.


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

Some people pay extra for crinkle paint!


Reply
Page 1 / 2
Share: