About three years ago I replaced the C7 incandescent bulbs in several of my wireframes with C7 LED replacement bulbs. I don't remember who I bought them from (I do know it wasn't CDI). They have worked great up until this year. One of my frames worked for the first night but was out the next night. Upon further investigation I discovered that the fuse was blown. I checked the resistance between the leads and they were shorted together. I then checked between the leads and the frame and there wasn't any shorts. So I started removing the bulbs one by one until the short went away. It turns out that one of the bulbs failed in a short.
In this case the fuse did its job and protected the rest of the frame. This is a good example of why you should always have fuses on your strings, even if you make your own custom strings like many do for their roofs. The fuse on the SSR should protect the strand (and potentially your house) but if you plug them directly into an outlet you need to have a fuse on it.
