Pixel node press
 
Notifications
Clear all

Pixel node press

17 Posts
10 Users
0 Reactions
13 K Views
Posts: 128
(@jonb256)
Estimable Member
Joined: 16 years ago

I used a Beer Bottling press for mine last year. Dont own a drill press.

Sent from my SM-G955U using Tapatalk


Reply
Posts: 155
(@rlemery)
Estimable Member
Joined: 13 years ago

Probably wouldn't break a finger it would just take it off. Running a sheet metal shop for 40 years I've seen my share of fingers cut off. It needs a foot switch and two palm switches to keep finger's out of harm's way.

Sent from my SM-G950U using Tapatalk


Reply
Posts: 7
Topic starter
(@jim-c-2)
Active Member
Joined: 8 years ago

I like the can crusher.

aknflyer wrote:I have a can crusher almost identical to that. http://www.kevinkrusher.com/
Maybe I could adapt it for pixels....:hmm:

Reply
Posts: 7
Topic starter
(@jim-c-2)
Active Member
Joined: 8 years ago

I used a nut driver chucked into a drill press. The strip was held into place by a 3d printed jig clamped into a vise. If only I could figure out how to make it work with bullet pixels.

I like the drill press idea.


Reply
Posts: 7
Topic starter
(@jim-c-2)
Active Member
Joined: 8 years ago

Now for something a little less dangerous.
Drill PVC for bullets.
https://www.youtube.com/watch?v=KYKagseTVK8


Reply
Page 3 / 4
Share: