so...I got this discounted full wave LED strings last year. 1 out of the ~50 strings I got had a problem...only half the string was lit (well, only because I messed with it. If you look at my picture, you'll know why I had to mess with it to begin with. (Very crude mspaint drawing, but I figured I couldn't explain this without a visual, or you would be confused)
black box = plug --- grey boxes are the little "pods" ---and use your imagination for the magical 3rd wire for the long string.
Anyways... the string of lights between the first and second pod was completely flipped around backwards, but it was connected to the correct pods...the entire string was woven like you would expect, so when I saw it, I figured they put the wrong ends into the wrong pods, so I cut / spliced it so that there was one long strand of lights (with no "special" loops)...plugged it in, and only half the string worked ---My fault for never attempting to plug it in before working on it.. OK, flip it back around, and test it again...voila! But, now I had a big loop (arggh) unbraid the whole thing, and flip it around the way it is supposed to go....there we go.
I guess this is the disadvantage of using LEDs...if this were an incan string, I would have just thrown the thing away, and got another (or 12). With the LEDs, I feel a little commitment though.
I am still very confused at how this could even happen in a manufacturing process...I mean, how does it pass QC (hmm, string, string, string, noose, string, string...hey Bob did you notice anything wrong with that 4th one...nope, keep going)
This is consistent with the way they wire the retail half wave strings. They flip every other section so they are powered by opposite sides of the wave. So if you add a full wave bridge (4 diodes) to a retail string to make them nice looking (and brighter) with no flicker, you have to flip the wires on each section to assure that all sections are lit.
There are posts here that describe the diode bridge process. I've updated all of mine to diode bridges, and people do notice the difference. People have commented to me that my lights to flicker like everyone elses and they enjoy looking at mine without having to look away. Many of you who don't see the flicker should be aware that abour 1.3rd of the people watching you show can see the flicker. A litle efoort on your part using 20 cents worth of diodes can fix the issue for everytone. My display is 90% incandescent and I am striving to keep the old fashioned look. I mask all my LEDs inside something to assure they are well diffused. The only exception is my C7s inside old wireframes are now entirely full wave LED replacement bulbs, using Warm White in place of the white and clear bulbs of the original wireframe. The colored C7 LED replacement bulbs also look pretty much like incandescent because the coloration of the globes diffuse the intendsity of the LEDs inside.

