Hey guys.
So last year I was having firing issues with my LED's not coming on, flickering, and bleeding into other channels. Spent a little time researching and could not find any real solutions to my issue. This year I added 16 strands of multi LED 100's to my mega tree (the ones from HD with the rounded 5mm style bulb) and could not get them to fire at all. After about 2 hours of looking through the forums I could not find the correction.
I read somewhere last year the intensity levels can effect the flicker so after fumbling my way through some programing I figured out how to correct the problem. Last year I did not invest as much time into correcting the problem as all the LED's would come on but bleed.
My Yard Multi's run at 95% (1.63amps so its a bunch of LED's)
Multi LED Icicles 90% (16 sets of 70cts)
Tree of LED multi's 90% (25 sets of 50ct)
and the mega tree 70% (16 sets of 100ct)
The mega tree was the biggest surprise and took the longest to figure out but not that I know the intensity levels I have zero bleed or flicker.
So if you are having troubles with cheap Lowes or HD LED's this may help.
