LED Arch Question
 
Notifications
Clear all

LED Arch Question

12 Posts
7 Users
0 Reactions
3,391 Views
Posts: 446
Topic starter
(@amigorick)
Honorable Member
Joined: 16 years ago
[#29833]

I built and used two 8 foot arches this year. I had 8 segments of white incans and 8 segments of red incans on each arch. They two colors
were wrapped on each segment together so I could change colors if I wanted. They worked okay and I controlled each arch
with a Renard SS16. I have seen arches that were using LED lights and they look "faster" than my incans. What type of LED's do I need
to use if I decide next year to convert the arches to LED? I hope to still use the SS16 Controllers unless there is an easier way. I would appreciate
any input and hope there will be some group buys available for some of these !!


11 Replies
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago

The LEDs appeared "Faster" because they dim differently than incandescent bulbs. If you want to use regular 110v LEDs you'll be fine with the Ren16ss controllers.


Reply
Posts: 446
Topic starter
(@amigorick)
Honorable Member
Joined: 16 years ago
tjetzer wrote:The LEDs appeared "Faster" because they dim differently than incandescent bulbs. If you want to use regular 110v LEDs you'll be fine with the Ren16ss controllers.

I hope this does not sound ignorant, but I do occasionally sequence the arches to fade up or down as a whole object. Are regular 110v LEDS capable of dimming? I have read about
adding a rectifier to each string to make them full wave. Is this necessary?


Reply
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago

Not all LED strings are capable of dimming. I know a lot of the Home Depot stuff from this year wasn't capable of dimming.

The less expensive LED strings are typically half wave. You're better off with full wave sealed LEDs.


Reply
Posts: 112
(@rogelio)
Estimable Member
Joined: 15 years ago

Half my stuff is full wave and half is half wave from Walmart. I cant and no one else could see a difference from the road. Up close, I can see the flicker of half wave but not from 5 feet. But like they said, some wont dim. HomeDepot Ecosmart stuff was talked about having capacitors in them.
I like the LEDs because I run my entire display from one outlet by my front door!
Roy


Reply
Page 1 / 3
Share: