Ok, I have never used the 5050 RGB LED strips (HERE is an example) and I have a question about their flexibility.
I would like to do a large singing pumpkin on a frame hung in front of the living room window for next Halloween. Now, obviously, these LED strips will roll up, but how flexible are they in the horizontal direction? Or are they at all? To do a pumpkin, they would have to bend 'sideways' to folllow the curve.
Anyone ever tried this? Am I barking up the wrong tree?
Thanks,
Andy
When the are laying on the table with the LED facing 'up' they bend 'vertically' pretty well. They do not bend 'horizontally' (in the plane of the tabletop) much at all. I would call it none.
Virtus wrote:When the are laying on the table with the LED facing 'up' they bend 'vertically' pretty well. They do not bend 'horizontally' (in the plane of the tabletop) much at all. I would call it none.
Kinda what I was afraid of............thanks.
Guess I'll have to go with strings.
Many of those strips are cutable, that may work for you. You could cut and splice between the angles.
rstehle wrote:Many of those strips are cutable, that may work for you. You could cut and splice between the angles.
Once Virtus told me they don't bend horizontally, this popped into my head. It might be worth a try to see how smooth a curve I can get. It may look fine from a distance. Especially if I cut it after every third diode.
I was just wanting the color abilities of RGB.
Thanks
That would be one way to do it but it sounds like quite a bit of work. An easier way would be to use side view led strips like these. I haven't tried them or even used this vendor. The link is just an example. Do your own search if it seems like something you'd like to try out. But they will bend in the direction that you'd want.
