This week I purchased 60+ strings of 35 LED size C6 lights at Home Depot here in Calgary for C$1.50 per box. These were red, yellow, blue, orange, and green lights in that order. My plan was to swap the blubs to make strings of all one color instead of multiple colors in each string.
All of the bulbs in the strings are the same base except the first (red) and the last (green) in each string which are larger and a different shape. I called the manufacture's office to ask why the first and last bulb bases are different and did not get a satisfactory answer. The instructions in each box mentions to "replace lamps with only 2 volt 0.04 watt or 3.4 volt 0.068 watt LED lamps provided with this product". I don't know whether the small base is 2 volt or 3.4 volt nor do I know about the larger base.
I have read some other threads about cutting strings and about adding resistors but still don't understand. Again, my objective was to take 60 strings of 35 LED lights with mixed colors and end up with 12 strings each of each of the 5 different colors.
Can I swap the bulbs that have the same size base without any negative affects? What do I do with the first (red) and last (green) bulbs in each string? How do I change these bulbs?
How do I confirm that all of the bulbs of the same size base are interchangeable? I read that LED bulbs of different colors have different voltage ratings.
What do I do with the first and last bulbs with the larger bases? For this red and green strings, is it as simple as swapping bulbs? What do I need to do about for the blue, yellow, and orange strings?
Please help educate me on LED light strings and how they are designed. Is my "bright" idea of converting multicolored string to solid colored strings going to work?
Thanks for helping educate me.
From my experience with LEDs, that first LED socket is a bit wider that the others because it has three wires going into it as a junction to get one side of the 110v to the end and/or the middle of the string to power the other half of the string. When I have to deal with one of those, (like to replace the LED if the legs rust off or it burns out (rarely) I usually end up having to take the LED out of it to replace the LED.
Not sure about your strings or how they are constructed like is the C6 cover sealed to the LED (if not just swap the cover?)? Can the LED come out of the base at all? Are the lights all white inside the plastic C6 cover and the cover plastic adds the color?
That will help to determine what to do about the "odd" base lights.
The brand of my lights is "Home Accents Holiday". Home Depot SKU is 687-626, Model LED-35L-12, Item TY289-815ML The box indicates 2.4 rated watts at 120 volts. The first and last bulbs have 3 wires while all of the others only have 2 wires.
Also, was this a good price for these lights? Home Depot appears to be have these on Clearance before inventory time. This is at least 80% off the original price.
CaptKirk - I will have to look tonight to see whether the LEDs are different colors. I know the bulbs have one short wire and one longer wire bent up on the outside of the base. If all of the LEDs are the same color and only the covers are different ---- I'm not normally that lucky. I will let you know tonight.
Thanks
You can swap the bulbs and make single colors.
The only issue you will have is that the solid blue and green strings will not be as bright.
The red, yellow, orange will be fine.
Those are half wave strings that don't pull even close to the 20ma that the bulbs are rated for.
No resistors will be necessary unless you convert to full wave.
As mentioned above, the bigger bulbs cases on the ends are due to the three wires going in. You can pull the led color you need out of the base and put it into the bigger base for that particular string. The lower contact is always the anode or longer leg of the led.
