Due to my conversion from 120vac LED lights to 120VDC I have begun rewiring all of my strands to account for the lack of ac cycles. I have not had any problems until I reached my net style lights.
With the single and icicle style strands you can simply find the point where the polarity would cross on the negative half cycle and swap the wires. With the net lights all of the LEDs are off in the middle and I can not tell where the source would be coming into these lights.
I have tried reversing the LEDs closest to the lights that are working in hopes that the diode would just need reversed but did not have any luck.
Has anyone else had a similiar situation or have a possible solution.
Thank you.
rjthorpe79 wrote:With the single and icicle style strands you can simply find the point where the polarity would cross on the negative half cycle and swap the wires. With the net lights all of the LEDs are off in the middle and I can not tell where the source would be coming into these lights.I have tried reversing the LEDs closest to the lights that are working in hopes that the diode would just need reversed but did not have any luck.
Can you tell how they are connected? (ie, how long the loops are) I think you would need to reverse all the LEDs in the loop, not just the first one, in order to let the DC flow thru.
It would be tedious, but you might need to cut in between where ever there is one LED on and one LED off, and then flip that entire cut out section around.
don
Thank you for the response Don.
Unfortunately I can not tell how they are connected as when I begin to follow one polarity the other does not follow the same path. To make things worse there is a material that helps hold the "net" shape which it the same size, color and material of the wire insulation.
I have tried reversing the polarity of the strand at a point where I thought the reversed LEDs began but did not have any luck.
I think I will try flipping the entire circuit around as you have stated. If it is indeed in the center of the strand it would make sense to rewire both ends.
Thanks again.
Rick
