Please correct me if I'm wrong, but as I understand it, you need to have full-wave LED lights to be able to dim them with Renard boards (particularly the Ren64, which I plan to use).
If that is true, how do you know the strings are full-wave? I've been looking at the LED lights on christmaslightsetc.com and I don't see anything that mentions "wave."
Any help would be appreciated.
James
James,
This is not true.
As long as you are running the pwm Renard code, you can dim half or full wave LED lights.
I have many thousands of half wave led lights and I dim them all !
As far as identifying half vs full wave you can tell by looking at a lit string and shaking it. A half wave string will 'shimmer'.
When it comes to ordering a string, you have to rely on what the manufacturer tells you.
JamesL85 wrote:Please correct me if I'm wrong, but as I understand it, you need to have full-wave LED lights to be able to dim them with Renard boards (particularly the Ren64, which I plan to use).If that is true, how do you know the strings are full-wave? I've been looking at the LED lights on christmaslightsetc.com and I don't see anything that mentions "wave."
Any help would be appreciated.
James
Sweet! That's actually a good thing! I think I'm going to hit Wal-Mart the day after Christmas and clean out their LED lights!!! LOL
Thanks for your help. 🙂
James
Also, your peripheral vision is much more capable of seeing the flicker in half wave lights. If they are on display, you can look for the flicker.
With 4 1N4004 diodes, solder, and heat shrink you can convert most half wave strings to full wave anyway. You'll probably like the way they look better, too.
The diodes are a buck for 2 at Radio Shack, or a penny each plus shipping at Tadyran Electronics.
JamesL85 wrote:I've been looking at the LED lights on christmaslightsetc.com and I don't see anything that mentions "wave."
I don't know which lights you were looking at getting, but the commercial ones I looked at (M5 and 5MM) do state "full-wave". I assume the ones billed as "flicker free" are, too, but you'd probably need to email the vendor directly for confirmation.
JamesL85 wrote:Sweet! That's actually a good thing! I think I'm going to hit Wal-Mart the day after Christmas and clean out their LED lights!!! LOLThanks for your help. 🙂
James
well if it is like last year ... after cristmas there was no light left as they did not carry extra ...i personaly had better price 3 week before christmas than after ...
cheer
I have had some experience with the Wally Mart LEDs. With half wave I had misfires. When I made them full wave I didn't have misfires anymore. You are more than likely going to have to convert.
Penfold wrote:With half wave I had misfires. When I made them full wave I didn't have misfires anymore.
Which type of misfires were you getting? Was it that some other (random or maybe predictable) lights that were supposed to be off flickered on briefly when these lights were turned on, or these lights came on when they were supposed to but did not stay on at full intensity, or something else?
don
Jack Stevens wrote:With 4 1N4004 diodes, solder, and heat shrink you can convert most half wave strings to full wave anyway. You'll probably like the way they look better, too.The diodes are a buck for 2 at Radio Shack, or a penny each plus shipping at Tadyran Electronics.
More details, or a link please. I can see the flickering on my 1/2 wave and none on my full wave and would love to know how to have all full wave. -- John
