Notifications
Clear all
Dec 29, 2015 8:01 am
The blob on the CDI strings is a voltage doubler circuit, which is why the strings are 100 bulbs in length. You will probably want to cut the strings in half, and use a more conventional type of rectification.
Thanks Randy! I was going ask if this was possible and you just cleared it up. Now I need to figure out the doubler circuit so I understand that for the future.
Dec 29, 2015 9:45 am
TMerk wrote:Thanks Randy! I was going ask if this was possible and you just cleared it up. Now I need to figure out the doubler circuit so I understand that for the future.
Here's a short description of the voltage doubler circuit
Considering that it operates at 340v, I would follow Randy's suggestion and convert to a full-wave bridge rectifier using or based on one of the circuits in my schematic.
Jimboha
Dec 31, 2015 12:26 am
Randy,
Yep, that looks like what parts we could see! I like you updated parts list with beefier components: I guess there have been failures before.
Jim
Page 3 / 3
Prev


