Full wave string bl...
 
Notifications
Clear all

Full wave string blob question

14 Posts
4 Users
0 Reactions
4,220 Views
Posts: 582
(@jimboha)
Honorable Member
Joined: 12 years ago

Good call, Randy! Doubling 120AC to 340DC would definitely provide enough voltage for the 100 blue LEDs. I hadn't seen this one yet...

I was assuming the empty holes were from a missing diode. With only one diode and one cap in this blob, it looks like they did the same type of "split-the-blob" trick. The other diode and cap are in the other blob. But it's looking like this would still require 4 wires: two for the A/C, one for the LEDs and another to complete the doubler circuit. Or is that blob in the photo missing other parts?

I agree with cutting strings, but probably into thirds.

Jimboha


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago
jimboha wrote:Good call, Randy! Doubling 120AC to 340DC would definitely provide enough voltage for the 100 blue LEDs. I hadn't seen this one yet...

I was assuming the empty holes were from a missing diode. With only one diode and one cap in this blob, it looks like they did the same type of "split-the-blob" trick. The other diode and cap are in the other blob. But it's looking like this would still require 4 wires: two for the A/C, one for the LEDs and another to complete the doubler circuit. Or is that blob in the photo missing other parts?

I agree with cutting strings, but probably into thirds.

Jimboha

Oops, thirds is correct. Yes, parts missing. Two diodes in each end, plus a cap and resistors. There used to be a diagram posted on here somewhere (far away and long ago)


Reply
Posts: 582
(@jimboha)
Honorable Member
Joined: 12 years ago
jimboha wrote:Doubling 120AC to 340DC would definitely provide enough voltage for the 100 blue LEDs.

But, WOW! 340v on a string of lights? How'd they get the UL listing?


Reply
Posts: 582
(@jimboha)
Honorable Member
Joined: 12 years ago
rstehle wrote:There used to be a diagram posted on here somewhere (far away and long ago)

Yeah, let me know if you find it. I'm very curious at what they did and why. I'm not seeing any advantage to splitting it, and didn't you mean a diode and a cap (plus R's) in each end (or just two of each in one blob)?

Jimboha


Reply
Don6699
Posts: 185
(@don6699)
Estimable Member
Joined: 13 years ago

One of my fav sites, you might want to poke around here:
http://led.linear1.org/led.wiz

It will show you what size that resistor is, try 60 led's for the quanty.


Reply
Page 2 / 3
Share: