Hi People
Can I get some advice on extending icicle lights. Or just confirmation I am on the correct path.
I have 24v LED icicles which are 5 metres long and I want to extend them to approx 8 1/2 metres using a spare string I bought.
My plan(and this is where the advice would come in!) is to firstly determine how many leds are in each series by cutting a wire at the start of the string to see how many leds go dark.
Then perhaps I should also check the next one to make sure the series repeats.
After I know how many leds in a series I can cut the spare string to the required length/number of series.
Then I can remove the end caps off the end of the led string and by wiring in one at a time to my power supply I can find which wire is which and attach the new sections in the correct place.
Does that make sense?
Any other ideas?
Cheers guys
Steve
Edit: Do DC lights pass the current down to the next series the same as AC lights?
IE. If I cut one wire to an led at the start will the whole string go dead, showing me nothing at all? or will just the one series go out?
Never mind. I went back to my old method of 'Cut first, ask second' and worked it out fairly easily. Each series is 6 leds so I just need to cut the right length and wire them to the same channels. Easy stuff.
Thanks for looking

