DIY Permanent Pixel...
 
Notifications
Clear all

DIY Permanent Pixel System

4 Posts
3 Users
0 Reactions
3,378 Views
Posts: 693
Topic starter
(@davdue)
Prominent Member
Joined: 19 years ago
[#57390]

I am looking at building my own system using 12mm square pixel strings. I am curious of what the spacing is with the Govee and Trimlight systems? They seem to be a larger spacing than I think they should be. I would purchase the pixels from Raywu. My intent would be use this system with various patterns or scenes throughout the year and add it to my show during Christmas. I would most likely use some sort of off the shelf controller during the year and use a ESPixelStick at Christmas unless there is an easy way to use the pixelstick stand alone the rest of the time. I will have to do some more research into controllers.

Sent from my iPhone using Tapatalk


3 Replies
Posts: 156
(@mr-fix)
Estimable Member
Joined: 6 years ago

Use a 3" max space

Sent from my SM-N975U using Tapatalk


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

you can use ESP V4 and have it run patterns. Or you can load WLED on the ESP and have run timed effects.


Reply
Posts: 693
Topic starter
(@davdue)
Prominent Member
Joined: 19 years ago

What app would I use to setup the effects for the nine holiday lights? I just saw on the WLED quick start using WS2812B RGBW lights. Does this work with WS2811 RGB lights?

Sent from my iPhone using Tapatalk


Reply
Share: