Cut control box off...
 
Notifications
Clear all

Cut control box off led light string

6 Posts
5 Users
0 Reactions
3,216 Views
Posts: 2
Topic starter
(@sjlesq99)
New Member
Joined: 13 years ago
[#28665]

Hello,
I am pretty new at working with LED's. I have been doing some research on some strands my friend bought off ebay. these strands are I believe called fairy leds. they have a small white control box with one button that switches modes. I have read the instructions and on how to mod this control box so it always stays on. my question is, my friend cut off the control box and wired it directly to the wall. i thought that these leds needed to be run on dc on ac - and the box had some type of rectifyer in there to convert ac to dc. the lights seem to be working well on ac, except that they blink. the ultimate goal was to keep the lights on and dim them. is there a hazard at wiring them direct to ac 110v? what is the best way to dim this set? do the mod on the box and buy a dimmer?
thanks,


5 Replies
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

You can cut the box off and hook the leds to the wall. You will get half the intensity and a bit of flicker. Either way, you can purchase a dimmer and dim them. However, depending on how the dimmer is implemented, you might also need a single C9 bulb so that you can dim the upper and lower 25% of the dimming range.


Reply
scottmcm
Posts: 621
(@scottmcm)
Prominent Member
Joined: 19 years ago

Use the attached instructions (from another thread on the forums) to make these bright and flicker free. I upgraded my mega tree this year with 16 strands of green fairy lights. The instructions show how to salvage the diodes from the controller box then put them to use as a rectifier. Enjoy! Dropbox link for PDF file... https://dl.dropboxusercontent.com/u/34187662/Converting_LEDs.pdf


Reply
Posts: 255
(@frankv)
Reputable Member
Joined: 17 years ago

I've done the above, except that instead of wiring to a mains plug, I wire the strings to a Renard for computer control... obviously this allows dimming.

Frank


Reply
scottmcm
Posts: 621
(@scottmcm)
Prominent Member
Joined: 19 years ago
frankv wrote:I've done the above, except that instead of wiring to a mains plug, I wire the strings to a Renard for computer control... obviously this allows dimming.

Frank

Yep...I have mine running from an SS24 and they dim nicely.


Reply
Posts: 2
Topic starter
(@sjlesq99)
New Member
Joined: 13 years ago

thank you so much everyone.


Reply
Share: