CaptKirk wrote:And other times it pulls the thin wire straight out of the insulation... 😉I've purchased a mega-tree qty of these recently at around $6 a throw. I've come up with a technique to remove the control box, and wire up an inline bridge using the diodes out of the control box. you end up with a small heat shrink lump in the wire near the plug. Full wave and reasonably inexpensive (not counting time). The only thing is that if you think the wires and control box are cheaply made, you need to look at the plug end to really see cheap manufacturing. I've been mostly replacing the cord ends with the leftovers from chopping multitap heads off cheap extensions cords to use the multitaps as controller outputs.
I have pictures if anyone wants a writeup.
I did much the same thing, although I ignored the diode bride altogether and just wired them directly to A/C, paralleling the four colors to the hot side and the return wire to the cold. I used them in my tune-to sign from Holiday Coro. But I couldn't agree with you more about what "cheap" really means. Wow... those are incredible and really define the concept!
Becareful, they are not for outdoor use.
NorCal_Lights wrote:Becareful, they are not for outdoor use.
Agreed! My tune-to sign is sealed on all sides and only the led bulb heads poke through the holes in the coro sign. I had absolutely no plans to use them anywhere because they were so darned cheap, but I thought this might work. In any event, it'll be an interesting test to see how they get through the Minnesnowda winter 😆
One thing that's pretty amazing to me is how the Chinese manufacturers could even assemble a product with wires that are so flimsy and thin. Geez...
I ordered a bunch of these and I was planning on using them for Arches... It looks like theres a setting for "Steady On". However I just thought about something. Once you sequence them to turn off, will it default to another setting when you sequence it to turn it back on? Anyone have any experience with these? I bought 24 of these things hoping they would be for outdoor use.. I know you get what you pay for, but I'm kinda on a budget this year.. I'll put some Shoe Goo or something over the wiring to make them water resistant if i have to... 🙂 Thanks in advance!
The only way we've figured out how to make those lights stay on is to cut the controller out of the picture and wire them directly. It's quite a challenge stripping the wire from those tiny wires so you can solder it together!!!
