Notifications
Clear all
Aug 06, 2012 3:39 pm
After watching your video and another, I realize that I don't need to flip the components on the board...they will be flipped when I iron them.
Thanks again.
Aug 06, 2012 4:42 pm
I think this is what you asked for in this thread.
http://doityourselfchristmas.com/forums/showthread.php?20859-Tiny-RJ45-Breakout
Keith R wrote:I hate to resurrect an old thread, but I am in need of making 5 or 6 boards to convert an RJ45 back to a header to run some servos in my 3-axis skulls. I can't find a board, or I would probably purchase it. I don't have a problem with the (muriatic/H2O2) process, I just can't get the programs I am using to get the correct orientation or size (scale) I need. The link in the first post is broken, and that might help. If anyone is willing to send me a pdf with 6 boards on it (to fit a standard size one-sided board) that would be better. I would rather try this on my own, so if you could point me in the right direction, great.
Attached is what I am trying to accomplish.
Thanks, keith
Aug 06, 2012 5:24 pm
Skunberg wrote:I think this is what you asked for in this thread.http://doityourselfchristmas.com/forums/showthread.php?20859-Tiny-RJ45-Breakout
I think these are a great DCSSR breakout board on a small footprint...However, I need the 3 wide headers for direct plug-in of the servo connectors.
Thanks!
Aug 06, 2012 9:37 pm
Keith R wrote:I think these are a great DCSSR breakout board on a small footprint...However, I need the 3 wide headers for direct plug-in of the servo connectors.
Thanks!
At less than $2 a board I thought solder on pigtails might work out for you.
But there is something to be said about making your own board too.
Brian
Page 2 / 2
Prev
